• 易迪拓培训,专注于微波、射频、天线设计工程师的培养
首页 > RFID和物联网 > RFID > 关于非接触式IC智能(射频)卡及其读写设备内核技术的研究与应用开发(连载12)

关于非接触式IC智能(射频)卡及其读写设备内核技术的研究与应用开发(连载12)

录入:edatop.com     点击:
;----------------- the 1st sector --------------------
COMPARE_04:    CJNE A,#04H,COMPARE_05
         lcall sector_01_common

       MOV 78h,#04h          ;READ'S Sect. NO.
         lcall read_x_block
         ljmp read_x_block_exit

COMPARE_05:    CJNE A,#05H,COMPARE_06
         lcall sector_01_common

       MOV 78h,#05h          ;READ'S Sect. NO.
         lcall read_x_block
         ljmp read_x_block_exit

COMPARE_06:    CJNE A,#06H,COMPARE_07
         lcall sector_01_common

       MOV 78h,#06h          ;READ'S Sect. NO.
         lcall read_x_block
         ljmp read_x_block_exit

COMPARE_07:    CJNE A,#07H,COMPARE_08
         lcall sector_01_common

       MOV 78h,#07h          ;READ'S Sect. NO.
         lcall read_x_block
         ljmp read_x_block_exit
;----------------- the 2nd sector --------------------
COMPARE_08:        
         CJNE A,#08H,COMPARE_09
         lcall sector_02_common

       MOV 78h,#08h          ;READ'S Sect. NO.        
         lcall read_x_block
         ljmp read_x_block_exit
COMPARE_09:         
         CJNE A,#09H,COMPARE_0A
         lcall sector_02_common
         MOV 78h,#09h          ;READ'S Sect. NO.
         lcall read_x_block
         ljmp read_x_block_exit

COMPARE_0A:    CJNE A,#10H,COMPARE_0B
         lcall sector_02_common
         MOV 78h,#0ah          ;READ'S Sect. NO.
         lcall read_x_block
         ljmp read_x_block_exit
COMPARE_0B:    CJNE A,#11H,COMPARE_0C
         lcall sector_02_common
         MOV 78h,#0bh          ;READ'S Sect. NO.
         lcall read_x_block
         ljmp read_x_block_exit
;-----------------the 3rd sector -------------------
COMPARE_0C:    CJNE A,#12H,COMPARE_0D
         lcall sector_03_common

       MOV 78h,#0ch          ;READ'S Sect. NO.
         lcall read_x_block
         ljmp read_x_block_exit

COMPARE_0D:    CJNE A,#13H,COMPARE_0E
         lcall sector_03_common
         MOV 78h,#0dh          ;READ'S Sect. NO.
         lcall read_x_block
         ljmp read_x_block_exit
COMPARE_0E:    CJNE A,#14H,COMPARE_0F
         lcall sector_03_common
         MOV 78h,#0eh          ;READ'S Sect. NO.
         lcall read_x_block
         ljmp read_x_block_exit
COMPARE_0F:    CJNE A,#15H,COMPARE_10
         lcall sector_03_common
         MOV 78h,#0fh          ;READ'S Sect. NO.
         lcall read_x_block
         ljmp read_x_block_exit
;---------------- the 4th sector------------------------
COMPARE_10:    CJNE A,#16H,COMPARE_11
         lcall sector_04_common
         MOV 78h,#10h          ;READ'S Sect. NO.
         lcall read_x_block
         ljmp read_x_block_exit

(省略COMPARE_11 至COMPARE_3E 之程序,基本同上)

COMPARE_3f:   CJNE A,#63H,read_x_block_exit
         lcall sector_15_common

       MOV 78h,#3fh          ;READ'S Sect. NO.
         lcall read_x_block
         ljmp read_x_block_exit
;------------------------ end of 0--63 block setup ----------------------

;---------------- exit ------------------------
read_x_block_exit:
    ret
;--------------------------------

;------------------------ DISP_BUF_right_MOVE -------------------------------
DISP_BUF_right_MOVE:
    MOV 32H,33H
    MOV 33H,34H
    MOV 34H,35H
    MOV 35H,37H
    MOV 37H,38H
    MOV 38H,39H
    MOV 39H,3AH

  RET

;--------------------- read_x_block--------------------------
read_x_block:
    setb p2.5        ;MCM ON (-RST=1)
    clr p2.4        ;MCM ON (-CS=0)

  MOV R2,#01H      ;SELECT REQUEST_STD
    ;MOV R2,#00H      
    lcall request      ;request
    lcall display
    lcall h_display
    lcall d500ms
    clr p2.6
    lcall init_disp_buf
    lcall display
    lcall h_display

  lcall anticollision   ;anticollision
    lcall display
    lcall h_display
    lcall d500ms
    clr p2.6
    lcall init_disp_buf
    lcall display
    lcall h_display

  lcall select      ;select
    lcall display
    lcall h_display
    lcall d500ms
    clr p2.6
    lcall init_disp_buf
    lcall display
    lcall h_display

  lcall load_key    ;load_key
    lcall display
    lcall h_display
    lcall d500ms
    lcall d500ms
    clr p2.6
    lcall init_disp_buf
    lcall display
    lcall h_display
    mov 7eh,79h      ;sel keyset0
    mov 7dh,7ah      ;
    mov 7ch,#60h     ;auth_1a instr. code
    lcall authentication  ;authentication
    lcall display
    lcall h_display
    lcall d500ms
    lcall d500ms
    clr p2.6
    lcall init_disp_buf
    lcall display
    lcall h_display

  mov 7dh ,#50h      ;the address for storing reading_data
    mov 7ch,78h       ;read sector & block
    lcall read       ;read
    lcall display
    lcall h_display
    lcall d500ms
    lcall d500ms
    clr p2.6
    lcall init_disp_buf
    lcall display
    lcall h_display

  lcall halt       ;halt
    lcall display
    lcall h_display
    lcall d500ms
    clr p2.6
    lcall init_disp_buf
    lcall display
    lcall h_display
    
    lcall disp_rd_blk    ;display the reading_value
    lcall clear_disp_rd_blk_in_cpu
    clr p2.6
    MOV A,#80H   ;SOFTWARE_RESET MCM
    MOV R0,#01H
    MOVX @R0,A
    LCALL D500MS
    ret
;---------------------end of “read_x_block” ----------------------

;-----------------------------------------------------
sector_01_common:
         MOV 7fh,#0AaH        
         MOV 7eh,#00H         
         MOV 7dh,#01h         
         MOV 7ch,#47H         
         MOV 79h,#80H         
         MOV 7ah, #81h        
         MOV 7bh, #60H        
        ret
;-----------------------------------------------------
sector_02_common:
         MOV 7fh,#0AbH        
         MOV 7eh,#00H         
         MOV 7dh,#02h         
         MOV 7ch,#60H        
         MOV 79h,#80H         
         MOV 7ah, #82h        
         MOV 7bh, #60H        
        ret
;----------------------------------------------------
(省略sector_03_common 至sector_14_common 之程序,基本同上)
;----------------------------------------------------
sector_15_common:
         MOV 7fh,#0AaH        
         MOV 7eh,#00H        
         MOV 7dh,#0fh        
         MOV 7ch,#60H        
         MOV 79h,#80H        
         MOV 7ah, #8fh        
         MOV 7bh, #60H        
        ret
;----------------------------------------------------
;end of this program.
  END
;====================== End of This Program =========================

结 束 语

智能IC卡片及其读写设备之技术正处于成熟/发展其间,只要我们中国自己的微电子技术再提高一步,相信我国将能实现真正意义上的“金卡工程”,因为实现这一工程的软件和硬件完全可以“自给自足”, 金融,邮电,公交等国家主干行业将能抵御外国“侵略”,不依赖进口。笔者相信在国内ICC界同行的共同努力下,在国家金卡工程办公室领导小组的正确领导下,我国的国民经济将在得益于“金卡工程”的前提下,高速增长。
(全文完)

13.56MHz NFC天线,13.56MHz RFID天线设计培训课程套装,让天线设计不再难

上一篇:IC卡接口芯片TDA8007的读写器设计
下一篇:DSP与IC卡接口设计

13.56MHz 线圈天线设计详情>>
手机天线设计培训教程详情>>

手机天线设计培训教程 国内最全面、系统、专业的手机天线设计培训课程,没有之一;是您学习手机天线设计的最佳选择...【More..

  网站地图