• 易迪拓培训,专注于微波、射频、天线设计工程师的培养
首页 > 微波/射频 > 微波滤波器论文下载 > 具有谐波抑制特性的 LTCC 带通滤波器新设计

具有谐波抑制特性的 LTCC 带通滤波器新设计

录入:edatop.com    点击:

具有谐波抑制特性的 LTCC 带通滤波器新设计

内容简介:提出了一种新型的具有多次谐波抑制功能的低温共烧陶瓷(LTCC)微型带通滤波器,该滤波器电路由电感耦合的四阶谐振腔组成.在一般抽头式梳状线滤波器设计的基础上,引入了交叉耦合,通过改进其结构,形成了多个传输零点,并结合电路仿真以及三维电磁场仿真,辅之以DOE(Design of Ex-periment)的设计方法,设计出了一种尺寸小、频率选择性好、阻带宽的滤波器.实际测试结果与仿真结果吻合较好,中心频率为13.4 GHz,其3 dB带宽为200 MHz,在15.5~35 GHz频率上的衰减均优于20 dB,体积仅为3.2 mm ×1.6 mm ×1.2 mm.所提方法对滤波器谐波抑制的设计具有指导作用.

Abstract:A novel low-temperature co-fired ceramics(LTCC)band-pass filter(BPF)with spurious responses suppression is proposed. The circuit of this filter is composed of 4-order resonant cavity by inductance coupling. The more transmission zeros are realized by adding modified cross-coupling. Based on the design of the tapped combline filter,combined with circuit simulation and 3-D EM(Electromagnetic)simulation,the filter which can achieve a small size,high selectivity,wide stop-band responses is designed with the help of DOE(design of ex-periment). The measured results of the filter agree well with the electromagnetic simulation. Simulation and measured results show that the BPF has a central frequency of 13.4 GHz,the 3 dB bandwidth is 200 MHz,and the stop-band attenuation is more than 20 dB from 15.5 GHz to 35 GHz. The final size of the fabricated filter is only 3.2 mm × 1.6 mm × 1.2 mm. The proposed method is of guidance for the design of filters with harmonics suppression.

作者:戴永胜, 韩群飞, 尹洪浩, 左同生, 谢秋月,

关键词:带通滤波器, 交叉耦合, 低温共烧陶瓷, 谐波抑制

学习掌握微波滤波器设计,敬请关注: 微波滤波器设计培训课程

上一篇:抽头式折叠线SIR带通滤波器设计
下一篇:新颖的三频带通滤波器的设计方法

微波滤波器设计培训视频教程详情>>

  网站地图