hspice2008版本报Lmin，Lmax，wmax，wmin错误
录入：edatop.com 阅读：
前段时间安装了新的软年实验结果如下：
1.VMware tool 6.5
2.Redhat Enterprise linux 5
3.hspice for linux 2008.03版本。
运行Hspice报错误如下：
**error** reference 0:p1 not found, or instance width or length does not fit into the wmax/wmin or lmax/lmin range.
it was referenced in element 1:mm39
the channel width= 1.000E-04 and length= 1.000E-06
the line number was 5
运用的Model为：
* update by daniel 2003/2/17 afternoon
* the v2.8 is different from v2.7 phase 1,
* this v2.8 mainly update some parts: ( Unchanged : BJT , Diode )
*model = bsim3
*NewModel = 3
*MetaSoftware Compatibility Mode
*These are BSIM3v3 Model Parameters.
有人认为是Hspice2008的不识LMIN，LMAX,但是我在另一环境 下工作正常 ，如下：
1，VMware tool 5.0
2.Redhat enterpise linux AS 4.0
3.Hspice for linux 2008.03
运行正常能过，只有如下警告：
**warning** (/home/lionx/project/public/spice_lib/EPROM05mam.txt:105) model n1 device geometries will not be checked against the limits set bylmin, lmax, wmin and wmax. To enable this check, add a period(.)to the model name(i.e. enable model selector).
*
小可在此寻求大虾解答，谢过！
*
1.VMware tool 6.5
2.Redhat Enterprise linux 5
3.hspice for linux 2008.03版本。
运行Hspice报错误如下：
**error** reference 0:p1 not found, or instance width or length does not fit into the wmax/wmin or lmax/lmin range.
it was referenced in element 1:mm39
the channel width= 1.000E-04 and length= 1.000E-06
the line number was 5
运用的Model为：
* update by daniel 2003/2/17 afternoon
* the v2.8 is different from v2.7 phase 1,
* this v2.8 mainly update some parts: ( Unchanged : BJT , Diode )
*model = bsim3
*NewModel = 3
*MetaSoftware Compatibility Mode
*These are BSIM3v3 Model Parameters.
有人认为是Hspice2008的不识LMIN，LMAX,但是我在另一环境 下工作正常 ，如下：
1，VMware tool 5.0
2.Redhat enterpise linux AS 4.0
3.Hspice for linux 2008.03
运行正常能过，只有如下警告：
**warning** (/home/lionx/project/public/spice_lib/EPROM05mam.txt:105) model n1 device geometries will not be checked against the limits set bylmin, lmax, wmin and wmax. To enable this check, add a period(.)to the model name(i.e. enable model selector).
*
小可在此寻求大虾解答，谢过！
*
我的hspice版本是****** HSPICE -- A-2008.03-SP1 32-BIT (May 26 2008) linux ******
第一个情况你的L或W的数值超出了model中上下限的范围。第二个情况下通过是因为没有检查是否在范围之内。只要看给出的英文信息就能懂。
第一种情况也出现忽略的警告。但是仿真未通过。第二种情况出现，但仿真还能通过。
有用的信息
我也遇到这种情况，我改了l和W还是不行啊
我仿真也遇到相同的问题，请问这个问题怎么解决。有哪位大神知道怎么解么?
Reference nch_25 not found, or instance width or length does not fit into the wmax/wmin or lmax/lmin range. It was referenced in element xavtx_tt.xtx_top.xtx.xatb_buf.xmatb3.xm1.main. The channel width= 4.500E-13 and length= 3.150E-13 .Please enter channel width and length that do not exceed the referenced maximal area Lmax= 5.401E-06 Lmin= 2.430E-07 Wmax= 9.000E-04 Wmin= 2.430E-07
0.315皮米的工艺呀，层主想要在原子上动刀，刻电路吗?另外，你的model name也和model文件里边的模型名不对应。瞬间觉得，自己工作这么多天，还是有长进的。
申明：网友回复良莠不齐，仅供参考。如需专业解答，请学习本站推出的微波射频专业培训课程。
