Why the efficiency of Boost converter is low at light load

Hi all:
I study a boost converter datasheet, and I found the efficiency is low (< 70%)
when the output current is small (10mA). But the chip is feature is low quiescent current,
so it is let me confused.

Could anyone help me?

Thanks.

mpig

1. how to defined the quiescent current? Is there any switching? or just the IDLE cycle?
2. the efficiency is mainly depending on the conduction loss and the switching loss. quiescent current typically has tiny contribution.
3. could you do a farther research, does the chip enter PSM/PFM when the loading is 10mA?
does the chip using sync control?

Hi mercybucher:
1. how to defined the quiescent current? Is there any switching? or just the IDLE cycle?
==>quiescent current Definition : No load and No switch.
2. the efficiency is mainly depending on the conduction loss and the switching loss. quiescent  
   current typically has tiny contribution.
3. could you do a farther research, does the chip enter PSM/PFM when the loading is 10mA?
   does the chip using sync control?
==>the chip using sync control and it uses fixed-frequency PWM mode, so I think the chip is
      still in PWM mode when loading is 10mA.
Thanks.
mpig

申明：网友回复良莠不齐，仅供参考。如需专业解答，请学习本站推出的微波射频专业培训课程。