PZ分析失败，求助
录入：edatop.com 阅读：
电路含bjt。
设置eval freq.=200K:
****************
PZ Analysis `pz'
****************
Warning from spectre during PZ analysis `pz'.
Bipolar Junction Transistor - frequency dependent components are present in
the circuit, approximated as AC equivalents at 2.000000e+05Hz for pz
analysis.
ahdl module - frequency dependent components are present in the circuit,
approximated as AC equivalents at 2.000000e+05Hz for pz analysis.
Trying `homotopy = gmin'.
No pole is found
No zero is found
Accumulated DC solution time = 70 ms.
Intrinsic pz analysis time = 290 ms.
Total time required for pz analysis `pz' was 360 ms.
设置eval freq.=300K:
****************
PZ Analysis `pz'
****************
Warning from spectre during PZ analysis `pz'.
Bipolar Junction Transistor - frequency dependent components are present in
the circuit, approximated as AC equivalents at 3.000000e+05Hz for pz
analysis.
ahdl module - frequency dependent components are present in the circuit,
approximated as AC equivalents at 3.000000e+05Hz for pz analysis.
Trying `homotopy = gmin'.
No pole is found
No zero is found
Accumulated DC solution time = 70 ms.
Intrinsic pz analysis time = 280 ms.
Total time required for pz analysis `pz' was 350 ms.
设置eval freq.=200K:
****************
PZ Analysis `pz'
****************
Warning from spectre during PZ analysis `pz'.
Bipolar Junction Transistor - frequency dependent components are present in
the circuit, approximated as AC equivalents at 2.000000e+05Hz for pz
analysis.
ahdl module - frequency dependent components are present in the circuit,
approximated as AC equivalents at 2.000000e+05Hz for pz analysis.
Trying `homotopy = gmin'.
No pole is found
No zero is found
Accumulated DC solution time = 70 ms.
Intrinsic pz analysis time = 290 ms.
Total time required for pz analysis `pz' was 360 ms.
设置eval freq.=300K:
****************
PZ Analysis `pz'
****************
Warning from spectre during PZ analysis `pz'.
Bipolar Junction Transistor - frequency dependent components are present in
the circuit, approximated as AC equivalents at 3.000000e+05Hz for pz
analysis.
ahdl module - frequency dependent components are present in the circuit,
approximated as AC equivalents at 3.000000e+05Hz for pz analysis.
Trying `homotopy = gmin'.
No pole is found
No zero is found
Accumulated DC solution time = 70 ms.
Intrinsic pz analysis time = 280 ms.
Total time required for pz analysis `pz' was 350 ms.
有什么解决或者替代的方法?
帮助里说：
PZ Analysis (pz)
Description
The PZ analysis linearizes the circuit about the DC operating point and computes the poles and zeros of the linearized network. To compute zeros, users need to specify input sources and output voltages or currents. If no input or output are given, then only poles are computed. In case there are frequency dependent components, poles and zeros are computed by approximating those components as equivalent conductances and capacitances evaluated at 1Hz. The PZ analysis currently uses direct solver for better accuracy. Small to medium circuit size will achieve better performance.
(Note: A frequency dependent component means the capacitance or conductance equivalent representation of the component is freqency varying. Examples are transimission lines or bjts with excess phases. A linear capacitor is not a frequency dependent component.)
频率设太低了吧
No one know it? please, help！
不知道你怎么写的网表，所以看不出来！
申明：网友回复良莠不齐，仅供参考。如需专业解答，请学习本站推出的微波射频专业培训课程。
