MTK23D平台+SKY77328，TX AFC offse.

TX AFC offset set up before test出错，还有功率校准时最大功率时出错，请帮忙，谢谢各位资深工程师
##
MTK GSM Test Sequence Demo
-------------------------------
Date : 01-24-2010 Time 16:41:51
------------
ATE Tool Version:5.3.7
Part Number:M803
Serial Number:000001
Revision:
Batch:01
Bar Code:MT012345678901234567
Error Code:503
------------
Enter into META Mode OK
CAP ID[0]:0,DAC:4096,Freq:27.40(PPM),Center Freq:903.00,Tch:65
CAP ID[0]:0,DAC:4096,Freq:24745.08
CAP ID[1]:63,DAC:4096,Freq:-21.94(PPM),Center Freq:903.00,Tch:65
CAP ID[1]:63,DAC:4096,Freq:-19814.16
Crystal CAPID check begin
CAPID=26,AFC DAC=0,FreqErr=-25444.8
PASS: Freq error PPM =-28.2
CAPID=26,AFC DAC=8191,FreqErr=20442.7
PASS: Freq error PPM =22.6
result[0]:-28.2
result[1]:22.6
AFC Calibration OK
Slope=6.820,min:1.000,max:10.000
Use Default Value=4066
============GSM900 Band=============
================== TX AFC offset set up before test =====================
First AFC Tracking:i_DAC1 4066
DAC1:4066,gain:25,Frequency offset:0
i_temp:0,dacValue:4066,i_temp2:4066
Band:0,ARFCN:65,TSC:0,us_Default_value:4066
FreqErr_norm min:8.77,CMU Rd Freq:8.77
Write AFC offset to NVRAM:0
Band:0,ARFCN:65,TSC:0,us_Default_value:4066
FreqErr_norm min:7.41,CMU Rd Freq:7.41
Write AFC offset to NVRAM:-1
Band:0,ARFCN:65,TSC:0,us_Default_value:4066
FreqErr_norm min:7.41,CMU Rd Freq:-16.08
Write AFC offset to NVRAM:0
FreqErr_min:-16.08,tx_afc_offset_min 0
============DCS1800 Band=============
================== TX AFC offset set up before test =====================
AFC DAC read from NVRAM= 4066
DAC1:4066,gain:25,Frequency offset:47
i_temp:3,dacValue:4066,i_temp2:4069
Band:1,ARFCN:700,TSC:0,us_Default_value:4069
FreqErr_norm min:10000000.00,CMU Rd Freq:99100000000000005192630646116011999232.00
Write AFC offset to NVRAM:0
Band:1,ARFCN:700,TSC:0,us_Default_value:4069
FreqErr_norm min:10000000.00,CMU Rd Freq:99100000000000005192630646116011999232.00
Write AFC offset to NVRAM:-1
Band:1,ARFCN:700,TSC:0,us_Default_value:4069
FreqErr_norm min:10000000.00,CMU Rd Freq:99100000000000005192630646116011999232.00
Write AFC offset to NVRAM:-2
Band:1,ARFCN:700,TSC:0,us_Default_value:4069
FreqErr_norm min:10000000.00,CMU Rd Freq:99100000000000005192630646116011999232.00
Write AFC offset to NVRAM:-3
Band:1,ARFCN:700,TSC:0,us_Default_value:4069
FreqErr_norm min:10000000.00,CMU Rd Freq:99100000000000005192630646116011999232.00
Write AFC offset to NVRAM:-4
Band:1,ARFCN:700,TSC:0,us_Default_value:4069
FreqErr_norm min:10000000.00,CMU Rd Freq:99100000000000005192630646116011999232.00
Write AFC offset to NVRAM:-5
Band:1,ARFCN:700,TSC:0,us_Default_value:4069
FreqErr_norm min:10000000.00,CMU Rd Freq:99100000000000005192630646116011999232.00
Write AFC offset to NVRAM:-6
Band:1,ARFCN:700,TSC:0,us_Default_value:4069
FreqErr_norm min:10000000.00,CMU Rd Freq:99100000000000005192630646116011999232.00
Write AFC offset to NVRAM:-7
Band:1,ARFCN:700,TSC:0,us_Default_value:4069
FreqErr_norm min:10000000.00,CMU Rd Freq:99100000000000005192630646116011999232.00
Write AFC offset to NVRAM:-8
Band:1,ARFCN:700,TSC:0,us_Default_value:4069
FreqErr_norm min:10000000.00,CMU Rd Freq:99100000000000005192630646116011999232.00
Write AFC offset to NVRAM:-9
Write the min tx afc offset 0 to NVRAM
FreqErr_min:49550000000000002596315323058005999616.00,tx_afc_offset_min 0
================== TX AFC offset calibration end=====================
AFC Calibration time=66.93(sec)
PL GSM TCH 15 = 0.12Pass MAX:4.50 MIN:-4.50
PL GSM TCH 30 = 0.12Pass MAX:4.50 MIN:-4.50
PL GSM TCH 40 = 0.12Pass MAX:4.50 MIN:-4.50
PL GSM TCH 50 = -0.12Pass MAX:4.50 MIN:-4.50
PL GSM TCH 60 = -0.12Pass MAX:4.50 MIN:-4.50
PL GSM TCH 70 = -0.12Pass MAX:4.50 MIN:-4.50
PL GSM TCH 80 = 0.12Pass MAX:4.50 MIN:-4.50
PL GSM TCH 95 = 0.12Pass MAX:4.50 MIN:-4.50
PL GSM TCH 110 = 0.50Pass MAX:4.50 MIN:-4.50
PL GSM TCH 124 = 0.75Pass MAX:4.50 MIN:-4.50
PL GSM TCH 1000 = 0.12Pass MAX:4.50 MIN:-4.50
PL GSM TCH 1023 = 0.25Pass MAX:4.50 MIN:-4.50
PL DCS TCH 550 = 2.38Pass MAX:4.50 MIN:-4.50
PL DCS TCH 580 = 2.62Pass MAX:4.50 MIN:-4.50
PL DCS TCH 610 = 2.88Pass MAX:4.50 MIN:-4.50
PL DCS TCH 640 = 3.12Pass MAX:4.50 MIN:-4.50
PL DCS TCH 670 = 3.38Pass MAX:4.50 MIN:-4.50
PL DCS TCH 700 = 3.50Pass MAX:4.50 MIN:-4.50
PL DCS TCH 730 = 3.38Pass MAX:4.50 MIN:-4.50
PL DCS TCH 760 = 3.38Pass MAX:4.50 MIN:-4.50
PL DCS TCH 790 = 3.00Pass MAX:4.50 MIN:-4.50
PL DCS TCH 820 = 2.75Pass MAX:4.50 MIN:-4.50
PL DCS TCH 850 = 2.88Pass MAX:4.50 MIN:-4.50
PL DCS TCH 885 = 3.50Pass MAX:4.50 MIN:-4.50
Path Loss Calibration OK
Pathloss Calibration time=10.53(sec)
TXIQ time=5.19(sec)
===========TX IQ Cal Start===============
===========TX IQ Cal Result Detail===============
TrimI =0,TrimQ =0,SBS =-38.469890,PSBS =0.000142
OffsetI ==0,OffsetQ =0,OOS =-38.974240,POOS =0.000127
TrimI =7,TrimQ =-7,SBS =-26.458740,PSBS =0.002260
OffsetI ==0,OffsetQ =30,OOS =-27.020980,POOS =0.001986
TrimI =-7,TrimQ =7,SBS =-33.346080,PSBS =0.000463
OffsetI ==30,OffsetQ =-30,OOS =-27.019460,POOS =0.001986
OffsetI ==-30,OffsetQ =-30,OOS =-24.525900,POOS =0.003527
Evaluate Xt = -5.16,TrimI = -3,TrimQ = 2
Evaluate OffsetI = 8,OffsetQ = -4
d_OOS_Check = -55.94,d_SBS_Check = -56.40
============ 77328 TX power control level calibration begin ============
----------------GSM900 APC Cal------------------------
PCLDacValue[0][0]=247
i_tx_pcl=12,d_max_p =20.500000,d_min_p=18.000000,d_wanted_p=19.000000,d_c=6.000000
NB TX Band=0,Ch =65,tsc=5,pcl=12,defaultValue=4066
Read TX Power=17.692830
d1 =7.843020,ss1=8
ApcProfile[0].rampData.power[7] =255
PCLDacValue[0][0] =255
new S =255
delta S =8
Set to NVRAM ==> set_level_band=2,pcl=12,dac=255
i_tx_pcl=12,d_max_p =20.500000,d_min_p=18.000000,d_wanted_p=19.000000,d_c=6.000000
NB TX Band=0,Ch =65,tsc=5,pcl=12,defaultValue=4066
Read TX Power=18.142100
d1 =5.147400,ss1=6
ApcProfile[0].rampData.power[7] =261
PCLDacValue[0][0] =261
new S =261
delta S =6
Set to NVRAM ==> set_level_band=2,pcl=12,dac=261
i_tx_pcl=12,d_max_p =20.500000,d_min_p=18.000000,d_wanted_p=19.000000,d_c=6.000000
NB TX Band=0,Ch =65,tsc=5,pcl=12,defaultValue=4066
Read TX Power=18.415320
d1 =3.508080,ss1=4
ApcProfile[0].rampData.power[7] =265
PCLDacValue[0][0] =265
new S =265
delta S =4
Set to NVRAM ==> set_level_band=2,pcl=12,dac=265
i_tx_pcl=12,d_max_p =20.500000,d_min_p=18.000000,d_wanted_p=19.000000,d_c=6.000000
NB TX Band=0,Ch =65,tsc=5,pcl=12,defaultValue=4066
Read TX Power=18.643730
d1 =2.137620,ss1=3
ApcProfile[0].rampData.power[7] =268
PCLDacValue[0][0] =268
new S =268
delta S =3
Set to NVRAM ==> set_level_band=2,pcl=12,dac=268
i_tx_pcl=12,d_max_p =20.500000,d_min_p=18.000000,d_wanted_p=19.000000,d_c=6.000000
NB TX Band=0,Ch =65,tsc=5,pcl=12,defaultValue=4066
Read TX Power=18.804120
d1 =1.175280,ss1=2
ApcProfile[0].rampData.power[7] =270
PCLDacValue[0][0] =270
new S =270
delta S =2
Set to NVRAM ==> set_level_band=2,pcl=12,dac=270
i_tx_pcl=12,d_max_p =20.500000,d_min_p=18.000000,d_wanted_p=19.000000,d_c=6.000000
NB TX Band=0,Ch =65,tsc=5,pcl=12,defaultValue=4066
Read TX Power=18.910470
delta s = 0
PCLDacValue[0][1]=603
i_tx_pcl=5,d_max_p =33.500000,d_min_p=31.000000,d_wanted_p=32.200000,d_c=35.000000
NB TX Band=0,Ch =65,tsc=5,pcl=5,defaultValue=4066
Read TX Power=31.042490
d1 =40.512850,ss1=41
ApcProfile[0].rampData.power[14] =644
PCLDacValue[0][1] =644
new S =644
delta S =41
Set to NVRAM ==> set_level_band=2,pcl=5,dac=644
i_tx_pcl=5,d_max_p =33.500000,d_min_p=31.000000,d_wanted_p=32.200000,d_c=35.000000
NB TX Band=0,Ch =65,tsc=5,pcl=5,defaultValue=4066
Read TX Power=32.153900
delta s = 0
----------------DCS1800 APC Cal-----------------------
PCLDacValue[1][0]=181
i_tx_pcl=8,d_max_p =15.000000,d_min_p=13.000000,d_wanted_p=14.000000,d_c=5.000000
NB TX Band=1,Ch =700,tsc=5,pcl=8,defaultValue=4066
Read TX Power=-2.097446
d1 =80.487230,ss1=81
ApcProfile[1].rampData.power[7] =262
PCLDacValue[1][0] =262
new S =262
delta S =81
Set to NVRAM ==> set_level_band=3,pcl=8,dac=262
i_tx_pcl=8,d_max_p =15.000000,d_min_p=13.000000,d_wanted_p=14.000000,d_c=5.000000
NB TX Band=1,Ch =700,tsc=5,pcl=8,defaultValue=4066
Read TX Power=3.919233
d1 =50.403835,ss1=51
ApcProfile[1].rampData.power[7] =313
PCLDacValue[1][0] =313
new S =313
delta S =51
Set to NVRAM ==> set_level_band=3,pcl=8,dac=313
i_tx_pcl=8,d_max_p =15.000000,d_min_p=13.000000,d_wanted_p=14.000000,d_c=5.000000
NB TX Band=1,Ch =700,tsc=5,pcl=8,defaultValue=4066
Read TX Power=6.481233
d1 =37.593835,ss1=38
ApcProfile[1].rampData.power[7] =351
PCLDacValue[1][0] =351
new S =351
delta S =38
Set to NVRAM ==> set_level_band=3,pcl=8,dac=351
i_tx_pcl=8,d_max_p =15.000000,d_min_p=13.000000,d_wanted_p=14.000000,d_c=5.000000
NB TX Band=1,Ch =700,tsc=5,pcl=8,defaultValue=4066
Read TX Power=8.020106
d1 =29.899470,ss1=30
ApcProfile[1].rampData.power[7] =381
PCLDacValue[1][0] =381
new S =381
delta S =30
Set to NVRAM ==> set_level_band=3,pcl=8,dac=381
i_tx_pcl=8,d_max_p =15.000000,d_min_p=13.000000,d_wanted_p=14.000000,d_c=5.000000
NB TX Band=1,Ch =700,tsc=5,pcl=8,defaultValue=4066
Read TX Power=9.059523
d1 =24.702385,ss1=25
ApcProfile[1].rampData.power[7] =406
PCLDacValue[1][0] =406
new S =406
delta S =25
Set to NVRAM ==> set_level_band=3,pcl=8,dac=406
i_tx_pcl=8,d_max_p =15.000000,d_min_p=13.000000,d_wanted_p=14.000000,d_c=5.000000
NB TX Band=1,Ch =700,tsc=5,pcl=8,defaultValue=4066
Read TX Power=9.759841
d1 =21.200795,ss1=22
ApcProfile[1].rampData.power[7] =428
PCLDacValue[1][0] =428
new S =428
delta S =22
Set to NVRAM ==> set_level_band=3,pcl=8,dac=428
i_tx_pcl=8,d_max_p =15.000000,d_min_p=13.000000,d_wanted_p=14.000000,d_c=5.000000
NB TX Band=1,Ch =700,tsc=5,pcl=8,defaultValue=4066
Read TX Power=10.358770
d1 =18.206150,ss1=19
ApcProfile[1].rampData.power[7] =447
PCLDacValue[1][0] =447
new S =447
delta S =19
Set to NVRAM ==> set_level_band=3,pcl=8,dac=447
i_tx_pcl=8,d_max_p =15.000000,d_min_p=13.000000,d_wanted_p=14.000000,d_c=5.000000
NB TX Band=1,Ch =700,tsc=5,pcl=8,defaultValue=4066
Read TX Power=10.802840
d1 =15.985800,ss1=16
ApcProfile[1].rampData.power[7] =463
PCLDacValue[1][0] =463
new S =463
delta S =16
Set to NVRAM ==> set_level_band=3,pcl=8,dac=463
i_tx_pcl=8,d_max_p =15.000000,d_min_p=13.000000,d_wanted_p=14.000000,d_c=5.000000
NB TX Band=1,Ch =700,tsc=5,pcl=8,defaultValue=4066
Read TX Power=11.179610
d1 =14.101950,ss1=15
ApcProfile[1].rampData.power[7] =478
PCLDacValue[1][0] =478
new S =478
delta S =15
Set to NVRAM ==> set_level_band=3,pcl=8,dac=478
i_tx_pcl=8,d_max_p =15.000000,d_min_p=13.000000,d_wanted_p=14.000000,d_c=5.000000
NB TX Band=1,Ch =700,tsc=5,pcl=8,defaultValue=4066
Read TX Power=11.478170
d1 =12.609150,ss1=13
ApcProfile[1].rampData.power[7] =491
PCLDacValue[1][0] =491
new S =491
delta S =13
Set to NVRAM ==> set_level_band=3,pcl=8,dac=491
i_tx_pcl=8,d_max_p =15.000000,d_min_p=13.000000,d_wanted_p=14.000000,d_c=5.000000
NB TX Band=1,Ch =700,tsc=5,pcl=8,defaultValue=4066
Read TX Power=11.758230
d1 =11.208850,ss1=12
ApcProfile[1].rampData.power[7] =503
PCLDacValue[1][0] =503
new S =503
delta S =12
Set to NVRAM ==> set_level_band=3,pcl=8,dac=503
i_tx_pcl=8,d_max_p =15.000000,d_min_p=13.000000,d_wanted_p=14.000000,d_c=5.000000
NB TX Band=1,Ch =700,tsc=5,pcl=8,defaultValue=4066
Read TX Power=11.964930
d1 =10.175350,ss1=11
ApcProfile[1].rampData.power[7] =514
PCLDacValue[1][0] =514
new S =514
delta S =11
Set to NVRAM ==> set_level_band=3,pcl=8,dac=514
i_tx_pcl=8,d_max_p =15.000000,d_min_p=13.000000,d_wanted_p=14.000000,d_c=5.000000
NB TX Band=1,Ch =700,tsc=5,pcl=8,defaultValue=4066
Read TX Power=12.136870
d1 =9.315650,ss1=10
ApcProfile[1].rampData.power[7] =524
PCLDacValue[1][0] =524
new S =524
delta S =10
Set to NVRAM ==> set_level_band=3,pcl=8,dac=524
i_tx_pcl=8,d_max_p =15.000000,d_min_p=13.000000,d_wanted_p=14.000000,d_c=5.000000
NB TX Band=1,Ch =700,tsc=5,pcl=8,defaultValue=4066
Read TX Power=12.292410
d1 =8.537950,ss1=9
ApcProfile[1].rampData.power[7] =533
PCLDacValue[1][0] =533
new S =533
delta S =9
Set to NVRAM ==> set_level_band=3,pcl=8,dac=533
i_tx_pcl=8,d_max_p =15.000000,d_min_p=13.000000,d_wanted_p=14.000000,d_c=5.000000
NB TX Band=1,Ch =700,tsc=5,pcl=8,defaultValue=4066
Read TX Power=12.460040
d1 =7.699800,ss1=8
ApcProfile[1].rampData.power[7] =541
PCLDacValue[1][0] =541
new S =541
delta S =8
Set to NVRAM ==> set_level_band=3,pcl=8,dac=541
i_tx_pcl=8,d_max_p =15.000000,d_min_p=13.000000,d_wanted_p=14.000000,d_c=5.000000
NB TX Band=1,Ch =700,tsc=5,pcl=8,defaultValue=4066
Read TX Power=12.572190
d1 =7.139050,ss1=8
ApcProfile[1].rampData.power[7] =549
PCLDacValue[1][0] =549
new S =549
delta S =8
Set to NVRAM ==> set_level_band=3,pcl=8,dac=549
i_tx_pcl=8,d_max_p =15.000000,d_min_p=13.000000,d_wanted_p=14.000000,d_c=5.000000
NB TX Band=1,Ch =700,tsc=5,pcl=8,defaultValue=4066
Read TX Power=12.748640
d1 =6.256800,ss1=7
ApcProfile[1].rampData.power[7] =556
PCLDacValue[1][0] =556
new S =556
delta S =7
Set to NVRAM ==> set_level_band=3,pcl=8,dac=556
i_tx_pcl=8,d_max_p =15.000000,d_min_p=13.000000,d_wanted_p=14.000000,d_c=5.000000
NB TX Band=1,Ch =700,tsc=5,pcl=8,defaultValue=4066
Read TX Power=12.830590
d1 =5.847050,ss1=6
ApcProfile[1].rampData.power[7] =562
PCLDacValue[1][0] =562
new S =562
delta S =6
Set to NVRAM ==> set_level_band=3,pcl=8,dac=562
i_tx_pcl=8,d_max_p =15.000000,d_min_p=13.000000,d_wanted_p=14.000000,d_c=5.000000
NB TX Band=1,Ch =700,tsc=5,pcl=8,defaultValue=4066
Read TX Power=12.907580
d1 =5.462100,ss1=6
ApcProfile[1].rampData.power[7] =568
PCLDacValue[1][0] =568
new S =568
delta S =6
Set to NVRAM ==> set_level_band=3,pcl=8,dac=568
i_tx_pcl=8,d_max_p =15.000000,d_min_p=13.000000,d_wanted_p=14.000000,d_c=5.000000
NB TX Band=1,Ch =700,tsc=5,pcl=8,defaultValue=4066
Read TX Power=12.980100
PCLDacValue[1][1]=525
i_tx_pcl=0,d_max_p =31.500000,d_min_p=28.000000,d_wanted_p=29.200000,d_c=20.000000
NB TX Band=1,Ch =700,tsc=5,pcl=0,defaultValue=4066
===================== TX Power Control Level calibration Fail===========
Sky77316 GSM Cal=34.93(sec)

申明：网友回复良莠不齐，仅供参考。