• 易迪拓培训,专注于微波、射频、天线设计工程师的培养
首页 > 电子设计 > PCB设计 > PADS设计问答 > pads中为什么PCB铺不了铜,线布好了,铺铜边框也做了,

pads中为什么PCB铺不了铜,线布好了,铺铜边框也做了,

录入:edatop.com    点击:
错误提示为:THERMAL RELIEF ERRORS REPORT -- GQ4002main09245.pcb -- Tue Sep 24 16:42:30 2013
Drilled pads with Nondrilled pads with
less than 50% thermal extensionsless than 50% thermal extensions
Report of Thermal Spokes Generator.
On Bottom:
U7.R14(42.13234, 60.72836) # = 0
U7.R13(41.48234, 60.72836) # = 0
U7.R10(39.53234, 60.72836) # = 0
U7.P11(40.18234, 60.07836) # = 0
U7.N10(39.53234, 59.42836) # = 0
U7.K8 (38.23234, 57.47836) # = 0
C41.1 (31.61528, 53.95756) # = 1
U7.AA13 (41.48234, 64.62836) # = 1
U7.AA10 (39.53234, 64.62836) # = 0
U7.C8 (38.23234, 52.92836) # = 1
U7.J7 (37.58234, 56.82836) # = 0
U7.C9 (38.88234, 52.92836) # = 1
U7.N3 (34.98234, 59.42836) # = 0
U7.U8 (38.23234, 62.02836) # = 1
U9.B8 (36.26414, 70.39505) # = 1
U9.F8 (39.46414, 70.39505) # = 1
U9.D8 (37.86414, 70.39505) # = 1
U9.H2 (41.06414, 75.19505) # = 1
U7.C11(40.18234, 52.92836) # = 0
U9.A3 (35.46414, 74.39505) # = 1
U7.K6 (36.93234, 57.47836) # = 1
U7.T15(42.78234, 61.37836) # = 0
U7.T14(42.13234, 61.37836) # = 0
U7.T12(40.83234, 61.37836) # = 0
U7.T9 (38.88234, 61.37836) # = 0
U7.M3 (34.98234, 58.77836) # = 0
U7.L3 (34.98234, 58.12836) # = 0
U7.J11(40.18234, 56.82836) # = 0
U7.C7 (37.58234, 52.92836) # = 1
On Top:
C162.2(49.19243, 58.67523) # = 0
C46.2 (32.62971, 51.89029) # = 0
C143.1(39.03136, 52.63647) # = 1
J6.22 (46.44413, 44.38196) # = 0
C15.2 (65.26357, 66.42046) # = 0
Total Drilled pads:0 Total Nondrilled pads: 34

一、检查板框设置;
二、区域内是否有对应的网络过孔;

搞定了吗? 没高点就把PCB文件发上来帮你搞定。

有没有给铜框覆网络?

射频工程师养成培训教程套装,助您快速成为一名优秀射频工程师...

天线设计工程师培训课程套装,资深专家授课,让天线设计不再难...

上一篇:PADS layout中如何切换过孔类型
下一篇:最新2013比思官方PADS9.5有声音视屏教程

射频和天线工程师培训课程详情>>

  网站地图