求助Allegro16.2生成Artwork出现的问题

跪求allegro16.2生成artwork出现报错解决方法 ：
Results from parameter file ...
DEVICE-TYPE GERBER_RS274X
OUTPUT-UNITS INCHES
FILM-SIZE 24000 16000
FORMAT 5.3
ABORT-ON-ERRORNO
SCALE 1
SUPPRESS-LEAD-ZEROESYES
SUPPRESS-TRAIL-ZEROES NO
SUPPRESS-EQUALYES
UNDEF-APT-CONTNO
WARNING: for raster artwork formats, artwork accuracy must be
at least one place greater than the database accuracy, up
to the maximum accuracy allowed by the selected output format.
Increase the accuracy by increasing the "Decimal Places" in
the FORMAT section of the artwork parameters and then rerun
artwork.
The current output is rounding down the data.Failure to change
the format may result in inaccurate arc coordinates in the output
files and possible shape/void plotting failures.
================================================================
PROCESSING FILM
TO FILE...
================================================================
FILM PARAMETERS :
---------------------------------------------------------
Undefined line width 6.000
Mirror code NONE
Rotate angle NONE
Offset x: 0.000
Offset y: 0.000
Plot negative NO
Suppress unconnected internal padsNO
WARNING: Film contains DRC error(s).
WARNING: Segment with same start and end points at
(312.890 -1452.988) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(1074.500 -1458.000) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(-1203.819 -1693.181) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(-1128.882 -925.181) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(-1128.882 -903.642) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(-812.469 -725.142) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(-812.461 -725.059) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(-768.260 -730.799) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(-943.358 -527.441) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at