哪位帮我看看怎么回事，覆铜后出现这样的错误？

THERMAL RELIEF ERRORS REPORT -- max6.pcb -- Thu Jul 15 09:33:28 2010
Drilled pads with Nondrilled pads with
less than 50% thermal extensionsless than 25% thermal extensions
Report of Violating Thermal Spokes Remover.
On Top:
IC3.3 (2012.7, 1408.9) # = 0
IC3.5 (2012.7, 1369.5) # = 0
IC3.7 (2012.7, 1330.2) # = 0
IC3.11(2012.7, 1251.4) # = 0
IC3.17(2150.5, 1172.7) # = 0
IC3.22(2248.9, 1172.7) # = 0
IC3.26(2347.3, 1251.4) # = 0
IC3.28(2347.3, 1290.8) # = 0
IC3.35(2347.3, 1428.6) # = 0
IC3.39(2248.9, 1507.3) # = 0
IC3.42(2189.8, 1507.3) # = 0
IC7.22(1997.5, 3648.5) # = 0
IC7.53(2602.5, 3460.1) # = 0
IC7.63(2602.5, 3774.1) # = 0
IC1.14(1572.5, 4562.75) # = 0
IC1.29(1907.5, 4625.75) # = 0
IC1.31(1907.5, 4688.75) # = 0
SP1.2 (927.5, 775) # = 0
SP1.5 (1052.5, 775) # = 0
Total Drilled pads:0 Total Nondrilled pads: 19
已经按网上说的修改了这里“thermals”

不保密把图发上来给你看看啊

这些地方没铺上铜

你可能设置了花孔，致使有些地方无法普通，你可以把一些花孔去掉，或者强行走线的方式连通。

应该不影响，设计验证通过就好了