- 易迪拓培训,专注于微波、射频、天线设计工程师的培养
大家一个问题，我用MTK6228分四个Gate 来作，做好了元件怎么调不出来呢
录入：edatop.com 点击：
请教大家一个问题，我用MTK6228分四个Gate 来作，做好了元件怎么调不出来呢
请问怎么做呢
Error: Gate A Decal U100A_DECAL has 180 terminals but gate definition has 0 pins.
Error: Gate B Decal U100B_DECAL has 73 terminals but gate definition has 0 pins.
Error: Gate C Decal U100C_DECAL has 35 terminals but gate definition has 0 pins.
Error: Gate D Decal U100D_DECAL has 26 terminals but gate definition has 0 pins.
请问怎么做呢
Error: Gate A Decal U100A_DECAL has 180 terminals but gate definition has 0 pins.
Error: Gate B Decal U100B_DECAL has 73 terminals but gate definition has 0 pins.
Error: Gate C Decal U100C_DECAL has 35 terminals but gate definition has 0 pins.
Error: Gate D Decal U100D_DECAL has 26 terminals but gate definition has 0 pins.
四个门电路是不是关联到一块了，要先到库中检查下。
没有给PIN编号
同意三楼！
给PIN编号了，但是调不出来
我也想搞明白这个事！
射频工程师养成培训教程套装，助您快速成为一名优秀射频工程师...
天线设计工程师培训课程套装，资深专家授课，让天线设计不再难...
上一篇：关于快捷显示单一层
下一篇：各个PCB软件都适用于什么公司？
射频和天线工程师培训课程详情>>
