电路图转PCB时出现的问题，请指点

Warning: Duplicate pin name +VO for pin number 4 on Gate D.
Warning: Duplicate pin name -VO for pin number 9 on Gate E.
Warning: Duplicate pin name -VO for pin number 7 on Gate E.
Warning: Duplicate pin name -VO for pin number 6 on Gate E.

在线等！

虽然没有用LOGIC ，但看到Duplicate pin name ，我想是你的PIN有重复的名字

那你画电路用什么软件？

Part Type AC/L has the following gate pins that do not match to the Library part:
(5 4) (4 5) (9 6) (6 7) (7 8) (8 9).
Non matching Part Type AC/L is used by the following parts:
AC/L.
Library Part Type AC/N has no decal assigned - not able to check following parts:
AC/N.
Library Part Type FG has no decal assigned - not able to check following parts:
FG.
Library Part Type PC123-B has no decal assigned - not able to check following parts:
R18 U3:1.
Library Part Type +VO has no decal assigned - not able to check following parts:
+VO.
Library Part Type -VO has no decal assigned - not able to check following parts:
-VO.

5楼的报告，都没有匹配，我有用的ORCAD，555，入错行了。

你的三极管封装有问题

我想问下高手：电源的端子台为7个PIN,这七个PIN分别配给AC/L,AC/N,FG,+VO(需要2个PIN）-VO(需要2个PIN），如何做到？就这个不会啊？拦路虎来了！先谢下！

7楼的GGMMJJDD，如何知道我的三极管封装不对？

还得自己解决啊？没有人帮忙？