• 易迪拓培训,专注于微波、射频、天线设计工程师的培养
首页 > 电子设计 > 电源技术 > 线性稳压电源LDO > 基于SiC414设计的6A降压电源稳压技术

基于SiC414设计的6A降压电源稳压技术

录入:edatop.com    点击:

SiC414集成了5V/200mA LDO的6A降压电源稳压器,开关频率高达1MHz,全部采用陶瓷电容.连续输出电流达6A,效率大于95%,内部软起动和软关断,主要用在笔记本电脑,台式电脑和服务器,数字HDTV和消费类电子,网络和通信设备,打印机,DSL和STB,嵌入式应用和点负载电源.本文介绍了SiC414主要特性, 功能方框图, 典型应用电路图和SiC414评估板电路图以及材料清单(BOM).

The Vishay Siliconix SiC414 is an advanced stand-alone synchronous buck regulator featuring integrated power MOSFETs, bootstrap diode, and an internal 5 V LDO in a space-saving MLPQ 4 x 4 - 28 pin package.

The SiC414 is capable of operating with all ceramic solutions and switching frequencies up to 1 MHz. The programmable frequency, synchronous operation and selectable power-save allow operation at high efficiency across the full range of load current. The internal LDO may be used to supply 5 V for the gate drive circuits or it may be bypassed with an external 5 V for optimum efficiency and used to drive external n-channel MOSFETs or other loads. Additional features include cycle-by-cycle current limit, voltage softstart, under-voltage protection, programmable over-current protection, soft shutdown and selectable power-save. The Vishay Siliconix SiC414 also provides an enable input and a power good output.

SiC414主要特性:

• High efficiency > 95 %

• 6 A continuous output current capability

• Integrated bootstrap switch

• Integrated 5 V/200 mA LDO with bypass logic

• Temperature compensated current limit

• Pseudo fixed-frequency adaptive on-time control

• All ceramic solution enabled

• Programmable input UVLO threshold

• Independent enable pin for switcher and LDO

• Selectable ultra-sonic power-save mode

• Internal soft-start and soft-shutdown   

• 1 % internal reference voltage

• Power good output and over voltage protection

• Halogen-free according to IEC 61249-2-21 definition

• Compliant to RoHS directive 2002/95/EC

SiC414应用:

• Notebook, desktop and server computers

• Digital HDTV and digital consumer applications

• Networking and telecommunication equipment

• Printers, DSL and STB applications

• Embedded applications

• Point of load power supplies

图1.SiC414功能方框图

图2.SiC414典型应用电路图 [p]

图3.SiC414评估板电路图

SiC414评估板材料清单(BOM):



图4.SiC414评估板PCB布局图(顶层)

射频工程师养成培训教程套装,助您快速成为一名优秀射频工程师...

天线设计工程师培训课程套装,资深专家授课,让天线设计不再难...

上一篇:基于MIC2829设计的3G-4G USB无线应用电源技术
下一篇:便携式系统选择电源拓扑方案的分析及对比

射频和天线工程师培训课程详情>>

  网站地图