- 易迪拓培训,专注于微波、射频、天线设计工程师的培养
大家进来看看，帮个忙好吗？
录入：edatop.com 点击：
---- Photoplot outline rectangle not found ... using drawing extents
Results from parameter file ...
DEVICE-TYPE GERBER_RS274X
OUTPUT-UNITS INCHES
FILM-SIZE 2400000 1600000
FORMAT 2.5
ABORT-ON-ERRORNO
SCALE 1
SUPPRESS-LEAD-ZEROESYES
SUPPRESS-TRAIL-ZEROES NO
SUPPRESS-EQUALNO
UNDEF-APT-CONTNO
================================================================
PROCESSING FILM
TO FILE...
================================================================
FILM PARAMETERS :
---------------------------------------------------------
Undefined line width 6.0
Mirror code NONE
Rotate angle NONE
Offset x: 0.0
Offset y: 0.0
Plot negative YES
Suppress unconnected internal padsNO
ERROR:Layer polarity of class ETCH subclass POWER does not
match film polarity of Negative.DRC may be unreliable.
WARNING: 0 width line found at (0.0 0.0)
... using undefined line width of 6.0
ERROR: aborting film - Shape with first seg=(10.1 10.1) [layer=POWER]
has a void with extents [(5474.7 106.1) (5724.9 256.3)] that touches
another shape with first seg=(10.1 10.1). Manually resolve problem.
ERROR: aborting film - artwork will not be generated！
Error in POWER--halting output.Artwork file not generated.
*** ERROR with POWER
------------------------------------------------------
SUMMARY:
*** ERROR with POWER
ARTWORK Error
Results from parameter file ...
DEVICE-TYPE GERBER_RS274X
OUTPUT-UNITS INCHES
FILM-SIZE 2400000 1600000
FORMAT 2.5
ABORT-ON-ERRORNO
SCALE 1
SUPPRESS-LEAD-ZEROESYES
SUPPRESS-TRAIL-ZEROES NO
SUPPRESS-EQUALNO
UNDEF-APT-CONTNO
================================================================
PROCESSING FILM
TO FILE...
================================================================
FILM PARAMETERS :
---------------------------------------------------------
Undefined line width 6.0
Mirror code NONE
Rotate angle NONE
Offset x: 0.0
Offset y: 0.0
Plot negative YES
Suppress unconnected internal padsNO
ERROR:Layer polarity of class ETCH subclass POWER does not
match film polarity of Negative.DRC may be unreliable.
WARNING: 0 width line found at (0.0 0.0)
... using undefined line width of 6.0
ERROR: aborting film - Shape with first seg=(10.1 10.1) [layer=POWER]
has a void with extents [(5474.7 106.1) (5724.9 256.3)] that touches
another shape with first seg=(10.1 10.1). Manually resolve problem.
ERROR: aborting film - artwork will not be generated！
Error in POWER--halting output.Artwork file not generated.
*** ERROR with POWER
------------------------------------------------------
SUMMARY:
*** ERROR with POWER
ARTWORK Error
应该是POWER层的铜皮有问题。
用SHAPE的CHECK，输入4，就会显示出错的地方，把这两个地方[(5474.7 106.1) (5724.9 256.3）过细的铜皮修正
我也遇到这个问题了，但是我把GND和POWER设置为负片后，竟然通过了，不知为何？但是我个人还是觉得应该设置为负片的。期待高手解决
EMC电磁兼容设计培训套装，视频教程,让您系统学习EMC知识...
射频工程师养成培训教程套装，助您快速成为一名优秀射频工程师...
上一篇：激励源问题
下一篇：易斯普技术期刊第二期 汽车电子EMC和防护设计
