• 易迪拓培训,专注于微波、射频、天线设计工程师的培养
首页 > 天线设计 > 天线设计论文下载 > 一种新颖的双陷波超宽带天线设计

一种新颖的双陷波超宽带天线设计

录入:edatop.com    点击:

内容简介:针对超宽带系统易受窄带信号干扰的问题,设计了一种新颖的基于金属开口谐振环结构的双陷波平面超宽带天线。通过在天线的辐射贴片上加载U形槽和在接地板上引入寄生条带的方法实现了双陷波特性。利用仿真软件研究了U形槽和寄生条带的物理尺寸对陷波特性的影响,并对所设计的超宽带天线进行了制作和测量。仿真和测试结果表明,天线在超宽带系统3.1~10.6GHz工作频段内的电压驻波比小于2,在WiMAX和WLAN频率范围具有良好的陷波特性,有效地抑制了超宽带通信系统与窄带通信系统之间潜在的干扰。

Abstract:A novel planar ultra-wideband antenna based on split ring resonator structure with dual band-notched characteristics is proposed in this paper due to that UWB system is easy to be interfered with the narrow-band signals.U-shaped slot in the radiating patch and one parasitic strip on the ground are utilized to achieve the dual band-notched characteristics.Effects of varying the physical size of the U-shaped slot and the parasitic strip on the antenna band-notched characteristic have also been studied using simulation software,the proposed antenna is fabricated and measured.Simulation and measurement results indicate that the proposed antenna yields a voltage standing wave ratio(VSWR) of less than 2 in the impedance bandwidth range of 3.1 to 10.6GHz,except the bandwidth of WiMAX and WLAN for band notch,which minimized the potential interferences between the ultra-wideband systems and the narrowband communication systems effectively.

作者:孙荣辉, 高卫东, 刘汉, 李乐,

关键词:超宽带天线, 双陷波特性, 金属开口谐振环, U形槽, 寄生条带,

天线工程师培训课程套装,让天线设计不再难

上一篇:电子收费系统5.8GHz射频接收天线研究
下一篇:共振金属纳米天线近场区域单分子荧光增益性质的研究

手机天线设计培训教程详情>>

手机天线设计培训教程 国内最全面、系统、专业的手机天线设计培训课程,没有之一;是您学习手机天线设计的最佳选择...【More..

天线设计培训课程推荐详情>>

  网站地图