• 易迪拓培训,专注于微波、射频、天线设计工程师的培养
首页 > 天线设计 > 天线设计论文下载 > 三角形嵌套多频单极印刷天线的仿真与实验

三角形嵌套多频单极印刷天线的仿真与实验

录入:edatop.com    点击:

内容简介:设计了一种三角形嵌套结构的具有四个频带的多频天线,该天线由三个三角形金属环和一个三角形金属片形成的辐射单元嵌套构成,四个单元共用一个顶点,可通过共面波导进行馈电。应用电磁仿真软件CST进行仿真分析,结果表明多频天线的频带个数、中心频点和带宽是由嵌套三角形的个数、高度和顶角角度控制,且各频点与相应单元的高度之间具有一致的规律。仿真设计了2.4GHz、3.5GHz、5.2GHz和5.8GHz四个频带的多频三角形分形嵌套单极印刷天线,并制作了天线实物进行实验验证。研究表明,三角形分形嵌套天线通频带可控性良好,且尺寸较小,易于制造,可广泛应用于WLAN/WiMAX等领域。

Abstract:A multi-band antenna with triangle-nested construction is proposed and designed,which can operate in four bands.The antenna is nested by four radiator units,including three triangle metal-rings and a triangle metal-patch.The four units have a common vertex,which can be fed by coplanar waveguide.The proposed antenna model has been simulated and analyzed by CST.The simulated results present that the number of multi-band,the central frequency and bandwidth can be controlled by the number and height of triangle-nested rings,as well as the angle of the vertex.Moreover,there is consistent regularity between every frequency and the height of the corresponding unit.Finally,a monopole multi-band printed antenna with fractal-nested triangle rings has been designed,working at 2.4GHz,3.5GHz,5.2GHz and 5.8GHz.What′s more,the antenna prototype has been manufactured and measured in anechoic chamber.The research results indicate that this proposed antenna can achieve an excellent controllability in pass-band.The total size of the antenna is miniature,which is feasible for manufacture and can be widely applied in WLAN or WiMAX fields.

作者:林澍, 蔡润南, 黄冠龙, 王宜欢, 蒋瑞祺, 王进祥,

关键词:多频天线, 三角形单极天线, 印刷天线, 共面波导, 嵌套结构,

天线工程师培训课程套装,让天线设计不再难

上一篇:HD-SHA型标准增益天线的绝对增益测试
下一篇:基于矩量法的分形环八木天线的特性分析

手机天线设计培训教程详情>>

手机天线设计培训教程 国内最全面、系统、专业的手机天线设计培训课程,没有之一;是您学习手机天线设计的最佳选择...【More..

天线设计培训课程推荐详情>>

  网站地图