• 易迪拓培训,专注于微波、射频、天线设计工程师的培养
首页 > 天线设计 > 天线设计论文下载 > 无线传感网传感器节点天线设计

无线传感网传感器节点天线设计

录入:edatop.com    点击:

无线传感网传感器节点天线设计

内容简介:选择了CC2420芯片作为传感器节点的射频通信与处理模块.根据CC2420射频I/O端口的特点与要求,选择的天线是印制折合偶极天线,并采用共面带状线对其馈电.通过仿真找到天线的谐振阻抗与谐振长度.谐振阻抗高于一般共面带状线的特性阻抗,因此对天线进行改进以适当降低其谐振阻抗,同时对基本匹配电路进行改进.对改进后的天线、馈线及阻抗匹配电路的正确性及性能进行了仿真与验证.

Abstract:The CC2420 is chosen as the RF processing and communicating unit of sensor-node.According to the characteristics of CC2420's RF I/O ports,a PFDA(Printed Folded-Dipole-Antenna) is used.The antenna is fed by a couple of CPS(Coplanar Strip ).After a series of simulations,the antenna's resonance impedance and length are acquired.The resonance impedance is higher than that of an ordinary CPS,so it is necessary to amend the antenna in order to reduce its resonance properly.The basic impedance-matching circuit has to be amended as well.The performance and correctness of the amended antenna,feeding line, and impedance-matching circuit are simulated and proved.

作者:邱金燕, 张子文, 毛善国,

关键词:传感器节点, 印制折合偶极天线, 共面带状线, 谐振阻抗, 阻抗匹配, 天线性能,

天线工程师培训课程套装,让天线设计不再难

上一篇:一种高增益强定向波导缝隙天线
下一篇:反射板型4L圆环天线的改进设计

手机天线设计培训教程详情>>

手机天线设计培训教程 国内最全面、系统、专业的手机天线设计培训课程,没有之一;是您学习手机天线设计的最佳选择...【More..

天线设计培训课程推荐详情>>

  网站地图