ADS2011仿真出现错误信息

看英文的意思是我的Port没放到边缘地方 ，但我尝试了很多次，都没放到边缘处 
仿真下来都错误了。 
 
不知道谁有什么办法解决这个问题呢 
 
 
 
--- WARNING ------------------------------------------------------------------- 
 
Pin P2 is positioned on more than one edge. 
Move the pin away from any unintended edges. 
 
------------------------------------------------------------------------------- 
--- WARNING ------------------------------------------------------------------- 
 
Pin "P1" on mask 2 is not fully connected to a 
conductive part of the design. 
 
------------------------------------------------------------------------------- 
--- WARNING ------------------------------------------------------------------- 
 
The port setup needed to be corrected: 
Calibration will not be used for port "P1" (pin 
"P1" is not on the edge between a conductive and 
a nonconductive region). 
 
------------------------------------------------------------------------------- 
Generating mesh at 1.1 GHz... 
--- ERROR --------------------------------------------------------------------- 
 
At least one pin or bondwire end is not fully 
connected to a conductive part of the design 
(see details above). 
This setup is invalid for a Momentum simulation. 
 
-------------------------------------------------------------------------------

申明：网友回复良莠不齐，仅供参考。如需专业帮助，请学习易迪拓培训专家讲授的ADS视频培训课程。