求INCISIVE15.20 Hotfix 安装包

請問一下你的base版的Base_INCISIVE15.20.001_lnx86_1of13.tar檔案大小是多大?
我的大小是: (949,319,680)，安裝到最後發現此tar裡面有兩個檔案解壓有問題，
INCISIVE15.20.001_lnx86.Base\CDROM1\kits\precosat64b15.20-p001lnx86.t.Z
INCISIVE15.20.001_lnx86.Base\CDROM1\kits\jasper15.20-p005lnx86.t.Z
我的base and hotfix
链接：https://pan.baidu.com/s/1gQp49RIcq_NO2clCMVhMgg
提取码：3499

共享取消了?

链接：https://pan.baidu.com/s/1ROHwV4f8kE_FLB8bQElmXg
提取码：4unr

我看看，你的分享取消了啊
我的安装了没有问题啊

這是我的iscape install 的 log file 中的 eror 訊息，這些error都是來自 Base_INCISIVE15.20.001_lnx86_1of13.tar 中的檔案，
剛好這個 tar 也是除了最後一個 tar 外不是 1024,010 kbyte 的大小，
所以是再產生tar前的檔案就有損毀了。
這些剛好會影響要跑 ovm ，還是有其他解法?

Unpacking: DisplayName - /kitscscBase15.20-p001lnx86.t.Z
Running post-install (DisplayName): /bin/sh /home/jarod/work/eda_lnx64/cadence/INCISIVE152/install/tmp/slpostload.sh cscBase15.20-p001lnx86.exe
Running :/bin/sh /home/jarod/work/eda_lnx64/cadence/INCISIVE152/install/tmp/slpostload.sh cscBase15.20-p001lnx86.exe:
Begining output from /bin/sh /home/jarod/work/eda_lnx64/cadence/INCISIVE152/install/tmp/slpostload.sh cscBase15.20-p001lnx86.exe
modelimport: 15.20-p001: (c) Copyright 1995-2016 Cadence Design Systems, Inc.modelimport: *F,INTERR: INTERNAL EXCEPTION-----------------------------------------------------------------The tool has encountered an unexpected condition and must exit.Contact Cadence Design Systems customer support about thisproblem and provide enough information to help us reproduce it,including the logfile that contains this error message.TOOL:modelimport15.20-p001HOSTNAME: debian64OPERATING SYSTEM: Linux 3.2.0-4-amd64 #1 SMP Debian 3.2.65-1+deb7u1 x86_64MESSAGE: No registry found at ./tools.lnx86/esl/models-----------------------------------------------------------------processor_catalog_registry donetar: processor_catalog_html.tar: Cannot open: No such file or directorytar: Error is not recoverable: exiting nowEnd of output from command /bin/sh /home/jarod/work/eda_lnx64/cadence/INCISIVE152/install/tmp/slpostload.sh cscBase15.20-p001lnx86.exe


Installing component (CDROM): cscBase_lnx86 15.20-p001lnx86
From: /home/zzz/INCISIVE15.20.001_lnx86.Base/CDROM1/kits/cscBase15.20-p001lnx86.t.Z
To:/home/jarod/work/eda_lnx64/cadence/INCISIVE152
Installed Component: cscBase_lnx86 15.20-p001lnx86
Running post-install (DisplayName): /bin/sh /home/jarod/work/eda_lnx64/cadence/INCISIVE152/install/tmp/slpostload.sh cscBase15.20-p001lnx86.exe
Running :/bin/sh /home/jarod/work/eda_lnx64/cadence/INCISIVE152/install/tmp/slpostload.sh cscBase15.20-p001lnx86.exe:
Begining output from /bin/sh /home/jarod/work/eda_lnx64/cadence/INCISIVE152/install/tmp/slpostload.sh cscBase15.20-p001lnx86.exe
modelimport: 15.20-p001: (c) Copyright 1995-2016 Cadence Design Systems, Inc.modelimport: *F,INTERR: INTERNAL EXCEPTION-----------------------------------------------------------------The tool has encountered an unexpected condition and must exit.Contact Cadence Design Systems customer support about thisproblem and provide enough information to help us reproduce it,including the logfile that contains this error message.TOOL:modelimport15.20-p001HOSTNAME: debian64OPERATING SYSTEM: Linux 3.2.0-4-amd64 #1 SMP Debian 3.2.65-1+deb7u1 x86_64MESSAGE: No registry found at ./tools.lnx86/esl/models-----------------------------------------------------------------processor_catalog_registry donetar: processor_catalog_registry.tar: Cannot open: No such file or directorytar: Error is not recoverable: exiting nowtar: processor_catalog_html.tar: Cannot open: No such file or directorytar: Error is not recoverable: exiting nowEnd of output from command /bin/sh /home/jarod/work/eda_lnx64/cadence/INCISIVE152/install/tmp/slpostload.sh cscBase15.20-p001lnx86.exe

共享取消了?

共享取消了?

共享取消了?

共享取消了?

申明：网友回复良莠不齐，仅供参考。如需专业帮助，请学习易迪拓培训专家讲授的ADS视频培训课程。