- 易迪拓培训,专注于微波、射频、天线设计工程师的培养
ADS编译报错求解决
录入:edatop.com 点击:
ADS导入gerber文件,EM设置里这个Port一直有问题,是什么原因呢?报错的文字说明如下:
There are no layout pins on layers mapped in the substrate
P1 contains P1, whose layer "DFS_v2.0.GTL(39)" is not mapped in the substrate
P2 contains P2, whose layer "DFS_v2.0.GTL(39)" is not mapped in the substrate
P3 contains P3, whose layer "DFS_v2.0.GTL(39)" is not mapped in the substrate
P4 contains P4, whose layer "DFS_v2.0.GTL(39)" is not mapped in the substrate
好心人帮帮忙~多谢~
There are no layout pins on layers mapped in the substrate
P1 contains P1, whose layer "DFS_v2.0.GTL(39)" is not mapped in the substrate
P2 contains P2, whose layer "DFS_v2.0.GTL(39)" is not mapped in the substrate
P3 contains P3, whose layer "DFS_v2.0.GTL(39)" is not mapped in the substrate
P4 contains P4, whose layer "DFS_v2.0.GTL(39)" is not mapped in the substrate
好心人帮帮忙~多谢~
ads中没有端口所在的layer,就是端口不匹配。
你设置一下em的层 跟你导入进来的层的电路板匹配,匹配完了应该就不报错了
申明:网友回复良莠不齐,仅供参考。如需专业帮助,请学习易迪拓培训专家讲授的ADS视频培训课程。
ADS培训课程推荐详情>>
国内最全面、最专业的Agilent ADS培训课程,可以帮助您从零开始,全面系统学习ADS设计应用【More..】
- Agilent ADS教学培训课程套装
- 两周学会ADS2011、ADS2013视频教程
- ADS2012、ADS2013射频电路设计详解
- ADS高低阻抗线微带滤波器设计培训教程
- ADS混频器仿真分析实例视频培训课程
- ADS Momentum电磁仿真设计视频课程
- ADS射频电路与通信系统设计高级培训
- ADS Layout和电磁仿真设计培训视频
- ADS Workspace and Simulators Training Course
- ADS Circuit Simulation Training Course
- ADS Layout and EM Simulation Training Course
- Agilent ADS 内部原版培训教材合集