• 易迪拓培训,专注于微波、射频、天线设计工程师的培养
首页 > ADS > ADS FAQ > finite ground plane with global or differential ports

finite ground plane with global or differential ports

录入:edatop.com    点击:
Hi, I am doing the em cosimulation of my board,which is the output matching of PA, and I want to see the difference between infinite ground plane and finite ground plane.

Here are my layout and substrate setup and schematic with finite ground plane.
(layout_finite.png),(substrate finite.png),(schematic_finite.png)
I set cond1(pink) as the top metal,and cond2(yellow) as the bottom metal. Because I use CPWG, the holes are placed to connect the cond1 with cond2.
Is it right for finite ground plane?

For the port setup, I've tried two ways
1. I set all the pins as global ports:
(port(1).png)
2. I set (Pin1,10),(Pin2,11),(Pin3,13) as three differential ports,and other pins remain global ports.
(port(2).png)
But the results are different, I don't know why....
(result_finite.png)(red is for global ports and blue is for differential ports)
Could anyone give me some advice??

Thanks~~

jeff0283 on Sep 21, 2015 9:46 AM


附图/附件


result_finite.png


schematic_finite.png


layout_finite.png


port(1).png


port(2).png


substrate finite.png

申明:网友回复良莠不齐,仅供参考。如需专业帮助,请学习易迪拓培训专家讲授的ADS视频培训课程

上一篇:Voltage controlled time delay
下一篇:Layout in ADS

ADS培训课程推荐详情>>

  网站地图