• 易迪拓培训,专注于微波、射频、天线设计工程师的培养
首页 > ADS > ADS FAQ > Help Momentum simulation in ads 2009

Help Momentum simulation in ads 2009

录入:edatop.com    点击:
Hello

I would be very grateful if you could help me solve this problem in ADS.
*
Simulation in ADS my system shows a perfect result for "schematic system" (my system is well adapted) but with "layout circuit" the system becomes no more adapted.
*
Can you, please, help me to solve this problem, I tried many times and I consulted the forums but unfortunately I can not find a solution.

You will find attached a detailed description of my system.
*
Sincerely,

../imgqa/eboard/EM/EM-3ozcilxvamt.png
../imgqa/eboard/EM/EM-gi0gv3pn2rg.png
../imgqa/eboard/EM/EM-bewhfoco1gs.png
../imgqa/eboard/EM/EM-bm4jjror2my.png
../imgqa/eboard/EM/EM-ttsbiqqcjop.png

You have tried to use a schematic "ground" symbol in layout. This doesn't work.

You need to draw a via instead. Then, make sure that the layer with the via polygon is mapped in your substrate as conncetion between cond and the ground plane.

Many thanks for your response :)

I draw a ground plane, but the problem still not resolved.

../imgqa/eboard/EM/EM-a1qpilc1uf4.png
../imgqa/eboard/EM/EM-ls0wnzbditq.png

You misunderstood what I wrote. The problem is that in layout, C13 and C14 are not connected to ground.

Please can you mention the different step necessary to draw the ground plane.

The ground plane is at the bottom of the substrate. In Momentum, you have created this already (GND). Just define a via layer in the Momentum substrate that connects top side (cond) with the bottom side (GND), and then draw a via circle on that layer.

I'm sorry to disturb you, But this is my first time I'm working on the ADS
Please can you tell me if this design is correct.

Thanks

../imgqa/eboard/EM/EM-ikb0q50ryp5.png

Looks correct to me:

- the yellow circles (for the vias) are drawn on "cond2"
- in your substrate you have mapped "cond2" as a via between "cond" and bottom GND.

So yes, this should work. The yellow vias will create the connection to ground.

With "layout circuit" the system still no adapted :(

Maybe you made a mistake with the co-simulation setup, where you connect the EM results from Momentum to the circuit components.

Google keyword: "Momentum co-simulation"

申明:网友回复良莠不齐,仅供参考。如需专业帮助,请学习易迪拓培训专家讲授的ADS视频培训课程

上一篇:Re: moving component beetween layers in ADS momentum
下一篇:How to draw circular arc in ADS layout and design loop anten

ADS培训课程推荐详情>>

  网站地图