- 易迪拓培训,专注于微波、射频、天线设计工程师的培养
ADS momentum problem: differential ports for microstrip
录入:edatop.com 点击:
hello every one,
i am designing a wilkinson power divider in ADS momentum, so to place a resister between the two output arm i draw a microstip line from each arm. when i insert port at the end of these microstrip lines, and trying to define the type of ports i get this message
" Port P4 cannot be associated with port number 5.
If they are in the same reference plane, and you want to associate them:
Please set both ports to the correct Port Type before
setting ^Associate with port number^ "
ok from reference plan i understand is either they are on the same x-axis or same y-axis, but how to resolve this issue, can any one help me.
Thanks in Advance
Best regards
i am designing a wilkinson power divider in ADS momentum, so to place a resister between the two output arm i draw a microstip line from each arm. when i insert port at the end of these microstrip lines, and trying to define the type of ports i get this message
" Port P4 cannot be associated with port number 5.
If they are in the same reference plane, and you want to associate them:
Please set both ports to the correct Port Type before
setting ^Associate with port number^ "
ok from reference plan i understand is either they are on the same x-axis or same y-axis, but how to resolve this issue, can any one help me.
Thanks in Advance
Best regards
申明:网友回复良莠不齐,仅供参考。如需专业帮助,请学习易迪拓培训专家讲授的ADS视频培训课程。
上一篇:How to increase the bandwidth of the microstrip patch antenna array in ADS
下一篇:needs more metal layer in ADS Momentum
ADS培训课程推荐详情>>
国内最全面、最专业的Agilent ADS培训课程,可以帮助您从零开始,全面系统学习ADS设计应用【More..】
- Agilent ADS教学培训课程套装
- 两周学会ADS2011、ADS2013视频教程
- ADS2012、ADS2013射频电路设计详解
- ADS高低阻抗线微带滤波器设计培训教程
- ADS混频器仿真分析实例视频培训课程
- ADS Momentum电磁仿真设计视频课程
- ADS射频电路与通信系统设计高级培训
- ADS Layout和电磁仿真设计培训视频
- ADS Workspace and Simulators Training Course
- ADS Circuit Simulation Training Course
- ADS Layout and EM Simulation Training Course
- Agilent ADS 内部原版培训教材合集