EMDS vs Momentum in ADS 2009? - for antenna properties

Hi,

I'm a beginner at using ADS, i'm using this software for my final year's project to design a Microstrip patch antenna 4X1 array,
and i'm trying to figure out what are my antenna's properties (gain, directivity, etc.) using ADS.

I've noticed there are two optional simulators for obtaining these properties - one through Momentum's simulation for far field (in 'post processing' option) and the other is in a tab called 'EMDS' where i can do the same far field simulation.
in both simulators i get VERY different results (different numbers for antenna's properties) ... which simulator is the right one?

thanks!

This can be simulated with Momentum with good accuracy.
It can also be simulated with the EMDS solver, which requires more user knowledge to set it up properly.

If your Momentum results do not agree with the EMDS results, for this antenna case, there is some mistake in one (or both) simulation configuration/models.

Hi,
EMDS uses finite elements method (mesh is 3D) although Momentum uses a planar method (Integrals Equations, Method of Moment, mesh is 2D). For your design that is a planar structure, i think that best results and quick time are given by Momentum ADS. I have already simulate a for rectangular patch array at 5.8 GHz, on one side with HFSS and in other side with ADS Momentum, after making the PCB , the measurements were much agree with ADS mmomentum.

Hello

my question is about simulation with HFSS and ADS, because I tried to do the same thing with an inverted F antenna I noticed that the result after makin the PCB were much agree with momentum , so in your designs , what were the diference between the both design( S11, geometry modification,...) in my case I had to increase the distance between the shorting point and the feeding to get a good result in HFSSand this distance is different ti PCB and momentum

many thanks

申明：网友回复良莠不齐，仅供参考。如需专业帮助，请学习易迪拓培训专家讲授的ADS视频培训课程。