• 易迪拓培训,专注于微波、射频、天线设计工程师的培养
首页 > ADS > ADS FAQ > Re: Agilent ADS Momentum crashes with strange errors

Re: Agilent ADS Momentum crashes with strange errors

录入:edatop.com    点击:
I have met the same problem before, and i have tried several methods to fix it.

1. Mesh the layout with coarse mesh, such as with small cells/wavelength or un-tick the "Edge mesh" option;

If the mesh is still too large, you can try method 2.

2. Set the "Momentum simulation resources", limit the number of threads to 1(maybe you can set the number to 2, 3, 4 or even larger).

Usually, the single thread can solve all problems, but with a much slower speed.

Please follow the above step posted by tqtstuff

Thanks.. Its working fine.. Follow the below procedure posted above

Start ADS2009
Run task manager (Ctrl+Alt+Del)
In processes tab, find "hpeesofemx.exe" and right click it, choose "Set Affinity"
Untick to reduce CPUs if you have multicore. Simulation should work perfectly with CPU 0 & CPU 1 selected. You can raise CPU number later to check if it still work.(My case works with 6 in 8 CPUs).
Now I am working on XP 64 bit OS with ADS2009 without this stubborn error.
Good luck

- - - Updated - - -

Please follow the above step posted by tqtstuff

Thanks.. Its working fine.. Follow the below procedure posted above

Start ADS2009
Run task manager (Ctrl+Alt+Del)
In processes tab, find "hpeesofemx.exe" and right click it, choose "Set Affinity"
Untick to reduce CPUs if you have multicore. Simulation should work perfectly with CPU 0 & CPU 1 selected. You can raise CPU number later to check if it still work.(My case works with 6 in 8 CPUs).
Now I am working on XP 64 bit OS with ADS2009 without this stubborn error.
Good luck

- - - Updated - - -

Please follow the above step posted by tqtstuff

Thanks.. Its working fine.. Follow the below procedure posted above

Start ADS2009
Run task manager (Ctrl+Alt+Del)
In processes tab, find "hpeesofemx.exe" and right click it, choose "Set Affinity"
Untick to reduce CPUs if you have multicore. Simulation should work perfectly with CPU 0 & CPU 1 selected. You can raise CPU number later to check if it still work.(My case works with 6 in 8 CPUs).
Now I am working on XP 64 bit OS with ADS2009 without this stubborn error.
Good luck

thanks a lot!
it really works

- - - Updated - - -

thanks a lot!
it really works

Thanx man.....it really helped!

I got the same problems with a powerful machine (i7 processor and 8 GB RAM) with ADS2009 running on Windows 7 64bit version...

affinity thing worked for me as well.. now running without any problem and can solve very complex structures as well...

cheers,
per_lube

thank you very much, but what are "hpeesofemx.exe" and "hpeesofdds.exe"

The original error said it ran out of virtual memory. You could defrag your hard drive Then manually set your virtual memory page file to something huge, like 100 GB, and see if that helps. Sounds like ADS is bleeding into your virtual memory and not freeing it up when you start a new simulation

Also, get CCleaner and run a clean before every simulation to clean out the system.

I notice I have a similar problem with Agilent Genesys 2010.05. When I analyze a file with a lot of frequencies, it is only using 13% of the CPU as shown in windows task manager. I tried the above trick with cores 1 &2 only, but it was even a little slower that way. I have the "priority" set as "High". the other 87% is "system idle" during computation. What gives.

Any ideas why? Window 7 ultimate and I7-2600K processor.

I tried genesys.exe in both windows 7 and windows xp sp2 compatibility mode--no difference. XP SP3 compatibility mode seems just a little faster, but not much.

Excellent It worked..
Thanks a lot...

very good!Thank u!

申明:网友回复良莠不齐,仅供参考。如需专业帮助,请学习易迪拓培训专家讲授的ADS视频培训课程

上一篇:[ADS] S-parameters plot in ADS via S1p file?
下一篇:[moved] apperture coupled feeding in microstrip stacked patch antenna in ads

ADS培训课程推荐详情>>

  网站地图