- 易迪拓培训,专注于微波、射频、天线设计工程师的培养
ADS .dxf file import: specific layer
录入:edatop.com 点击:
Hello ppl,
I have a 4 layer PCB stack up and the corresponding .dxf file imported in ADS. My doubt is that I know that layer 1 which is signal trace 1 corresponds to the .dxf layer Trace_01 and same is the case with signal trace 2 i.e Trace_04. Now between these two layers I have ground and Power supply so the stack up something like this (include dielectric after every layer)
Signal Trace 1
Gnd
Power Supply
Signal Trace 2
Now I am not able to understand how to import the GND and power supply planes as they are Pour_Outline 2 and Pour_Out,ine 3 in my .dxf files. But I want to import them as copper materials. Please help me with this import problem.
Thank you
Samkeet
I have a 4 layer PCB stack up and the corresponding .dxf file imported in ADS. My doubt is that I know that layer 1 which is signal trace 1 corresponds to the .dxf layer Trace_01 and same is the case with signal trace 2 i.e Trace_04. Now between these two layers I have ground and Power supply so the stack up something like this (include dielectric after every layer)
Signal Trace 1
Gnd
Power Supply
Signal Trace 2
Now I am not able to understand how to import the GND and power supply planes as they are Pour_Outline 2 and Pour_Out,ine 3 in my .dxf files. But I want to import them as copper materials. Please help me with this import problem.
Thank you
Samkeet
Maybe you can output as gerber, them import in ADS,PM Me ,i can help you.
申明:网友回复良莠不齐,仅供参考。如需专业帮助,请学习易迪拓培训专家讲授的ADS视频培训课程。
上一篇:How can I use a .s37p file in ADS
下一篇:How to round corners in ADS?
ADS培训课程推荐详情>>
国内最全面、最专业的Agilent ADS培训课程,可以帮助您从零开始,全面系统学习ADS设计应用【More..】
- Agilent ADS教学培训课程套装
- 两周学会ADS2011、ADS2013视频教程
- ADS2012、ADS2013射频电路设计详解
- ADS高低阻抗线微带滤波器设计培训教程
- ADS混频器仿真分析实例视频培训课程
- ADS Momentum电磁仿真设计视频课程
- ADS射频电路与通信系统设计高级培训
- ADS Layout和电磁仿真设计培训视频
- ADS Workspace and Simulators Training Course
- ADS Circuit Simulation Training Course
- ADS Layout and EM Simulation Training Course
- Agilent ADS 内部原版培训教材合集