• 易迪拓培训,专注于微波、射频、天线设计工程师的培养
首页 > ADS > ADS FAQ > Can we simulate far field in ADS EM Co-Simulation with lumped elements?

Can we simulate far field in ADS EM Co-Simulation with lumped elements?

录入:edatop.com    点击:
A friend of mine is designing an antenna with lumped elements and diodes mounted. The spice model of the diodes can be found in the internet. In his design, he needs to choose a proper bias to achieve his goal of the gain or bandwidth of the antenna, or something else. I found that the EM Co-Simulation in ADS is very convenient in designing a project which has both PCB and circuit component involved. The field effect of the PCB, if it doesn't change, can be only simulated once even when we change other parameters related to components or devices any times we like. So if he just change the bias voltage other than the board itself, can it save some time to get the far field by using EM Co-Simulation?

Co-simulation helps to combine planar(microstrip) based circuit and lumped circuit element as well as active devices in schematic form in ADS.
One need to simulate layout elements in momentum and call these results
in circuit schematic,to combine with lumped and active devices.
You can see realtime response of your total circuit by tuning voltages or
lumped elements in schematic.

That's true. That is what I know.

But my problem is to get the far field result which is mainly derived from the EM data. So I'm thinking whether we can get the far field data from co-simulation which can save a lot of time if the board is unchanged.

I guess the answer is negative....

Yes, you can easily do this. The layout doesn't change, so the EM results are valid.

For co-simulated far field (antenna pattern), the circuit excitation AEL add-on is used. You need to re-simulate the circuit simulation with the changed bias, and then read in the updated data into the antenna pattern viewer.

ADS online help:
Home > Simulation > Electromagnetic > EM Circuit Cosimulation > Using the EM Circuit Excitation AEL Addon
qthelp://ads.2014.01/doc/em/Using_the_EM_Circuit_Excitation_AEL_Addon.html

Thank you. You helped me a lot.

申明:网友回复良莠不齐,仅供参考。如需专业帮助,请学习易迪拓培训专家讲授的ADS视频培训课程

上一篇:transistor nonlinear model ads
下一篇:Help Required in designing a 3 port filter uisng ADS2009

ADS培训课程推荐详情>>

  网站地图