• 易迪拓培训,专注于微波、射频、天线设计工程师的培养
首页 > ADS > ADS FAQ > port-to-port isolation equation in ADS

port-to-port isolation equation in ADS

录入:edatop.com    点击:
For port-to-port isolation curve in data display window in ADS, I need to LO2IF, LO2RF,? equations, but I can?t write it, because I don?t know it?s relation, can I help me about it, please?

If you do a HB simulation and all ports are 50 Ohm, use dBm function to calculate power at the port then extract the powers between each other at frequency of interest.This will give you
isolation between the ports.For instance if you have LO=1GHz,IF=10MHz and RF=1.01GHz your common beat will be at 10MHz.
dBm(VRF[1])=Power at 10MHz @port VRF
dBm(VRF[100])Power at 1GHz @port VRF
So isolationRF_LO=dBm(VRF[1])-dBm(VRF[100])
etc..
Tou can use this method to all ports.
There are other possibilities as well like Mixer Design Guide , use it with proper templates.

申明:网友回复良莠不齐,仅供参考。如需专业帮助,请学习易迪拓培训专家讲授的ADS视频培训课程

上一篇:ADS coupled line design with LineCalc
下一篇:TSMC RFCMOS 65nm ADS design kits

ADS培训课程推荐详情>>

  网站地图