• 易迪拓培训,专注于微波、射频、天线设计工程师的培养
首页 > ADS > ADS FAQ > ads design antenna

ads design antenna

录入:edatop.com    点击:
hello all,
can anyone help me to design these two antenna using HFSS
the first antenna is like this



it has as parameters:



the second antenna is:




it has as parameters:



please i need urgent help
and thanks in advance

Relative dielectric constant and losses? (εr, tanδ)
Dielectric slab thickness? (h)
Metallization thickness? (t)
Frequency?
BTW I'm not an HFSS user but an ADS Momentum one. I think it should not be very difficult to simulate both antennas.

thanks for reply
i think too that it isn't difficult but i'am new in HFSS and i have to design these two antenna as soon as possible i don't have time.
for the Relative dielectric constant and loses , h, Metallization thickness, t
Frequency , the first antenna is UWB's antenna and i will choose any dielectric
the frequancy is around 5.6GHZ for example .
the second antenna is a patch miniatarized antenna i can choose as dielectric FR4 with h = 1,6 mm
permittivity = 4,4 et un tan = 0,02.
for this phase i have to simulate which anu dielectric and i will modify them after trying to realize the antenna.
i'am waiting for your help.
and thanks

I don't understand what you want to do. You cannot especify the lengths and widths of a antenna and expect it to work using"...any dielectric..." It has no sense

Once again. The antenna is not going to work with the aforementioned geometry if it is not designed to use FR4. And which frequency?
But, do you want to design the antennas or do you want to analyze them? Neither HFSS nor ADS are design programs. They are analysis programs and can help you to test your design before manufacturing. Of course you can make a parametrized geometry with all your lengths and widths, a goal function (say s11) an put HFSS/ADS to work. But that is not engineering. You can do that even without knowing what an antenna is.
Sorry to be rude and good luck.

no thanks for advice.
i accept criticism.
all what i say my professor tell me them.
he says to me to work as begining with any dielectric and we will chage it.
for the FR4, it's true this antenna work with FR4, i find it in a thesis.
there are RFID's antenna.
any way thanks for your reply and for your advices and your wishes

If you upload what you have done, I can look at them and try to fix them if you have any errors.

Cesar

I edited the file that you sent you. The drawing that you posted does not have the size parameters, so i did not change that much. I did change the the overall boundary settings t give you an idea how to make it. All you have to to is fix the size of the patch.

Cesar

i have designed the two antennas but i find problems in boundaries, how to choose the frequence...
can any one help me, please?
i used HFSS 9
and i'am thankful

hello all,
can anyone help me to design these antenna using HFSS

PS:
have designed the two antennas but i find problems in boundaries, how to choose the frequence...
can any one help me, please?
i used HFSS 9
and i'am thankful
++++++++++++++++++++++++++++

h=-1.6
delete perfE2

PS:
mail: mano_apt@yahoo.fr
je t'attend

thanks but even when i changed them i find errors

i also want to microstrip patch antenna.Please help me.how to start in simulation in HFSS?

Look at HFss tutorial there is an example on that

check here:

http://www.scribd.com/doc/16584538/HFSS-Tutorial
http://www.emtalk.com/tut_1.htm

All the best

i tried to do the simulation of the first antenna it was successeful but i'am not convinced because when i tried to visualize the gain or any other result in 3D polar i find result at zero
can any one tell me the problem

Hi

If u have good result for the S parameter, so u can easily obtain ragiation pattern, don't forget to create infinte sphere.

Waiting you for any help

Good luk

申明:网友回复良莠不齐,仅供参考。如需专业帮助,请学习易迪拓培训专家讲授的ADS视频培训课程

上一篇:IP3 optimization at ADS2011
下一篇:Modelling a 3-port resonator cavity in ADS using s2p files

ADS培训课程推荐详情>>

  网站地图