• 易迪拓培训,专注于微波、射频、天线设计工程师的培养
首页 > ADS > ADS FAQ > agilent ads s2p file

agilent ads s2p file

录入:edatop.com    点击:
I can do one of two things, I think.

I did some simulations of transmission lines of different lengths in Sonnet. I then exported the .s2p files in Touchstone format.

Can I import those .s2p files into Agilent ADS and run some unit step or something to see the skew? If yes then how do I set that up? I'm new with ADS. Frequency range is 1-10 GHz.

OR!

Can I just do it by hand?

The signals go down copper transmission lines (striplines) and the dielectric material has a dielectric constant (Dk) of 3.2.

Is it just the material with a Dk of 3.2 that I does most of the skewing?
Meaning is it a basic had calculation of 1/sqrt(3.2) to find the velocity factor down the material? Then I can get the time it takes to get down the material by just using the speed of light times the velocity factor and then dividing that by the distance, correct?

Is it that easy?

Hand calculations for long line could result inaccurate. but it is easy.
I suggest to use ADS.

Connect a pulse generator with the desired frequency to excite at one port and the other port terminate.
see the timing and calculate the skew.

申明:网友回复良莠不齐,仅供参考。如需专业帮助,请学习易迪拓培训专家讲授的ADS视频培训课程

上一篇:Substrate Definition (size) for fabrication in ADS momentum
下一篇:BPF with Defected Ground Structure in ADS 2008 and HFSS example

ADS培训课程推荐详情>>

  网站地图