- 易迪拓培训,专注于微波、射频、天线设计工程师的培养
About an example in ADS2005
录入:edatop.com 点击:
In ADS2005, there is an example of CATV_prj. The signal source is V-ntone with 77 frequences and voltages, such as Freq[1]=49 MHz,Freq[2]=55.25MHz... Freq[10]=103.25 MHz, Freq[11]=109.25 MHz.
HB simulation controller is set up as following:
Maxorder=2
Freq[1]=6 MHz
Freq[2]=0.25 MHz
Order[1]=100
Order[2]=1900
FundOrderSample=2
UseKrylov=yes
EquationName[1]="Vin"
EquationName[2]="X_dBmV"
My questions are:
1. Why do the Freqs be set to 6MHz and 0.25MHz?
2. Why is Order[1] equal to 100 and Order[2] equal to1900?
3. In simulation results, the carry frequencies are correct from 49 MHz to97.25 MHz.But after 97.25 MHz, like 103.25MHz, the carry frequencied become ***.3 MHz or ***.2 MHz, instead of ***.25MHz. Such as 103.25MHz becomes 103.3MHz. Why? Where is the problem?
HB simulation controller is set up as following:
Maxorder=2
Freq[1]=6 MHz
Freq[2]=0.25 MHz
Order[1]=100
Order[2]=1900
FundOrderSample=2
UseKrylov=yes
EquationName[1]="Vin"
EquationName[2]="X_dBmV"
My questions are:
1. Why do the Freqs be set to 6MHz and 0.25MHz?
2. Why is Order[1] equal to 100 and Order[2] equal to1900?
3. In simulation results, the carry frequencies are correct from 49 MHz to97.25 MHz.But after 97.25 MHz, like 103.25MHz, the carry frequencied become ***.3 MHz or ***.2 MHz, instead of ***.25MHz. Such as 103.25MHz becomes 103.3MHz. Why? Where is the problem?
Pls help!
Nobody do it?
申明:网友回复良莠不齐,仅供参考。如需专业帮助,请学习易迪拓培训专家讲授的ADS视频培训课程。
上一篇:Help with Agilent ADS
下一篇:How to draw circular arc in ADS layout &design loop ante
ADS培训课程推荐详情>>
国内最全面、最专业的Agilent ADS培训课程,可以帮助您从零开始,全面系统学习ADS设计应用【More..】
- Agilent ADS教学培训课程套装
- 两周学会ADS2011、ADS2013视频教程
- ADS2012、ADS2013射频电路设计详解
- ADS高低阻抗线微带滤波器设计培训教程
- ADS混频器仿真分析实例视频培训课程
- ADS Momentum电磁仿真设计视频课程
- ADS射频电路与通信系统设计高级培训
- ADS Layout和电磁仿真设计培训视频
- ADS Workspace and Simulators Training Course
- ADS Circuit Simulation Training Course
- ADS Layout and EM Simulation Training Course
- Agilent ADS 内部原版培训教材合集