• 易迪拓培训,专注于微波、射频、天线设计工程师的培养
首页 > ADS > ADS FAQ > cascade noise ads

cascade noise ads

录入:edatop.com    点击:
For design of GPS system,
suppose the GPS receiver CHIP's Noise Figure is 3dB, and I need deisgn a LNA with 1.2dB , just like this
LNA + GPS_IC
1.2dB + 3dB
which the total noise figure is 3.2dB?

anybody help me ? thanks

Here is a simple explanation of cascaded noise figure:
http://www.qsl.net/va3iul/Noise/noise.html

Hi,

How much gain do u have in first amp?

David

u need to the read the lecture of the noise of Ali niknijad

http://rfic.eecs.berkeley.edu/~nikne.../lectures.html

it will help a lot

khouly

Read about Friis equation

h**p://www.microwaves101.com/encyclopedia/noisefigure.cfm

What many people fail to include is the losses in the interstage networks. If these have a loss of X dB they are included as a stage with a NF of X dB and a gain of -X dB.

thanks for your help
As i know ,in GSM system, the SAW loss is about 2dB just the SAW's NF is 2dB, if the GSM Transceiver's NF is 2dB, the Total NF is 4dB
But in this GPS case , i need to cal the total nosie Figure from LNA to GPS_IC i need to give the first gain and the second stage gain only give the first and second stage NF can't cal the total nosie figure
here i had distinguished it from your help
thanks again

申明:网友回复良莠不齐,仅供参考。如需专业帮助,请学习易迪拓培训专家讲授的ADS视频培训课程

上一篇:ADS data help.
下一篇:Simulation Problem On ADS

ADS培训课程推荐详情>>

  网站地图