• 易迪拓培训,专注于微波、射频、天线设计工程师的培养
首页 > ADS > ADS FAQ > Convert Spectre netlist to ADS netlist

Convert Spectre netlist to ADS netlist

录入:edatop.com    点击:
How to convert Spectre format netlist to @DS netlist that can be simulated in @DS enverionment?

there is a netlist translator come in @Ds , see the manuals and u will do it
the translator also translate from HSpice netlist to @DS

khouly

There is no direct netlist translator from Cadence to ADS except ADS Dynamic Link.
ADS DL is other version of ADS and it is ran through Cadence to reach to circuit simulation of ADS.
Another way is to use RFDE integrated within Cadence which is better.

Otherwise there is no direct translator...

http://eesof.tm.agilent.com/docs/ads...ist/index.html
try this link
it is the manual of netlist translator in @DS , i have used it to translate HSpice netlist to @DS one
it need some work , i have done it

check it BigBoss

thanks
khouly

I know this feature but this is valid only spicelike netlists. You know well, in Cadence we use "customized models" and these are parametric mode, therefore they should be converted Cadence native netlist.
In other hand, if you have basic spice netlist, of course it's possible to convert directly into ADS.

But this is not the case...

申明:网友回复良莠不齐,仅供参考。如需专业帮助,请学习易迪拓培训专家讲授的ADS视频培训课程

上一篇:help: ads simulation error
下一篇:ads distributed amplifier

ADS培训课程推荐详情>>

  网站地图