- 易迪拓培训,专注于微波、射频、天线设计工程师的培养
Designing A Single Ended UHF BJT Mixer Using the ADS Software
录入:edatop.com 点击:
Objectives:
• A simple UHF Mixer operating at 430.0 MHz is designed. The RF signal at 430.0
MHz is down converted into IF frequency of 20.0 MHz.
• The mixer is targeted to have no attenuation (conversion gain of 0dB) and an
operating noise figure of less than 10dB.
• The design steps are divided into 5 parts. These are the DC biasing of the mixer
circuit, S-parameters measurement for RF and IF, input matching, output matching
and final design verification.
BJT_UHF_Mixer.pdf
• A simple UHF Mixer operating at 430.0 MHz is designed. The RF signal at 430.0
MHz is down converted into IF frequency of 20.0 MHz.
• The mixer is targeted to have no attenuation (conversion gain of 0dB) and an
operating noise figure of less than 10dB.
• The design steps are divided into 5 parts. These are the DC biasing of the mixer
circuit, S-parameters measurement for RF and IF, input matching, output matching
and final design verification.
BJT_UHF_Mixer.pdf
申明:网友回复良莠不齐,仅供参考。如需专业帮助,请学习易迪拓培训专家讲授的ADS视频培训课程。
上一篇:ADS2008安装后启动不了
下一篇:ADS微带线MSUB设置疑问
ADS培训课程推荐详情>>
国内最全面、最专业的Agilent ADS培训课程,可以帮助您从零开始,全面系统学习ADS设计应用【More..】
- Agilent ADS教学培训课程套装
- 两周学会ADS2011、ADS2013视频教程
- ADS2012、ADS2013射频电路设计详解
- ADS高低阻抗线微带滤波器设计培训教程
- ADS混频器仿真分析实例视频培训课程
- ADS Momentum电磁仿真设计视频课程
- ADS射频电路与通信系统设计高级培训
- ADS Layout和电磁仿真设计培训视频
- ADS Workspace and Simulators Training Course
- ADS Circuit Simulation Training Course
- ADS Layout and EM Simulation Training Course
- Agilent ADS 内部原版培训教材合集