- 易迪拓培训,专注于微波、射频、天线设计工程师的培养
Modeling A Schottky diode in MWO
录入：edatop.com 点击：
Hi all,
I am trying to model Schottky diode CD7621-000, can anybody help. When I am directly pumping the diode with -10 dBm signal, I am getting a conversion loss of 14.57 dB, which is too low. Approximately the loss should be
10 log (1 + Rs/Rj + w^2*Cj^2*Rs*Rj)
Rj = Junction resistance = around 40 Ohm
Rs = 6 Ohm,
Cj = 0.11 pF
The loss comes out to be 0.6189 dB
Thanks for your help in advance.
I am trying to model Schottky diode CD7621-000, can anybody help. When I am directly pumping the diode with -10 dBm signal, I am getting a conversion loss of 14.57 dB, which is too low. Approximately the loss should be
10 log (1 + Rs/Rj + w^2*Cj^2*Rs*Rj)
Rj = Junction resistance = around 40 Ohm
Rs = 6 Ohm,
Cj = 0.11 pF
The loss comes out to be 0.6189 dB
Thanks for your help in advance.
