Agilent 频谱分析仪蓝牙测试手册
来源: 评论:0 点击:
文件名:07721-E4402-90090.pdf
kVoa6jgq.pdf(1.57 MB)
The Bluetooth Radio Unit
The Bluetooth radio unit is shown in Figure 1-1 as the transmitter and receiver
sections of the block diagram. The transmitter upconverts the baseband
information to the frequency-modulated carrier. Frequency hopping and bursting
are performed at this level. Conversely, the receiver downconverts and
demodulates the RF signal. Table 1-1 summarizes some of the key RF
characteristics of Bluetooth.
Figure 1-1
Hardware options required
Additional hardware options must be installed in the spectrum analyzer before
Bluetooth measurements can be made. Table 2-2 lists the hardware options
available and the measurements that they enable.
Not all of the options can be installed by the user. Some of the options require that
the instrument be returned to the factory or an Agilent Technologies service center.
In addition, some of the options require Performance Verification and Adjustments
to be performed after installation. Refer to Table 2-2 for option specific
information.
NOTE When transporting the instrument, use the original packaging or comparable
packaging. If the shipping container is damaged, any part is missing, or you do not
have an appropriate shipping container, notify Agilent Technologies at one of the
locations shown on Table 6-1on page 102.
kVoa6jgq.pdf(1.57 MB)
The Bluetooth Radio Unit
The Bluetooth radio unit is shown in Figure 1-1 as the transmitter and receiver
sections of the block diagram. The transmitter upconverts the baseband
information to the frequency-modulated carrier. Frequency hopping and bursting
are performed at this level. Conversely, the receiver downconverts and
demodulates the RF signal. Table 1-1 summarizes some of the key RF
characteristics of Bluetooth.
Figure 1-1
Hardware options required
Additional hardware options must be installed in the spectrum analyzer before
Bluetooth measurements can be made. Table 2-2 lists the hardware options
available and the measurements that they enable.
Not all of the options can be installed by the user. Some of the options require that
the instrument be returned to the factory or an Agilent Technologies service center.
In addition, some of the options require Performance Verification and Adjustments
to be performed after installation. Refer to Table 2-2 for option specific
information.
NOTE When transporting the instrument, use the original packaging or comparable
packaging. If the shipping container is damaged, any part is missing, or you do not
have an appropriate shipping container, notify Agilent Technologies at one of the
locations shown on Table 6-1on page 102.
如果需要更多资料,大家可以到安捷伦的中文官方网站上下载,具体网址BAIDU 或者 GOOGLE 一下就知道了。
不错,多谢提供!
谢谢!!
谢谢!!
zhi chi mian fei :)
顶!支持好人!
支持好人一下,Thanks
相关热词搜索:<B>文件名< B>:07721-E4402-90090 pdf<br><br><a class= &qu
评论排行
- ·HFSS天线设计入门中文视频教程(1)
- ·CST2013破解文件,和谐万岁(1)
- ·关于打不开ADS帮助文档(1)
- ·基于左手介质的小型微带天线(1)
- ·HFSS10中仿真出现的错误(1)
- ·HFSS仿真螺旋天线模型的脚本程序(1)
- ·HFSS能仿真线圈天线吗?(1)
- ·Momentum中无法设置Substrate?(1)
- ·大家ADS2008中PIN二极管如何设定啊(1)
- ·请教ADS中的MSub个参数的意思(1)
- ·HFSS中怎么设置一个平面波激励啊(1)
- ·Hfss局部加密网格(1)
- ·HFSS使用心得(1)
- ·HFSS设计微带发夹型滤波器,求耦合系数请教(1)
- ·Microstrip Antenna Technology (Ke...(0)
- ·跟大家分享个宽频带90度功分移相网络(0)
- ·求教ADS中倍频器与频率源设置(0)
- ·30多个ADS视频教程在线观看(0)
- ·微波射频电路仿真100例(0)
- ·射频功率放大器设计资料(0)