• 易迪拓培训,专注于微波、射频、天线设计工程师的培养
首页 > 微波/射频 > 微波滤波器论文下载 > 基于耦合传输线的宽上通带窄带带阻滤波器设计

基于耦合传输线的宽上通带窄带带阻滤波器设计

录入:edatop.com    点击:

基于耦合传输线的宽上通带窄带带阻滤波器设计

内容简介:微波系统中常常采用窄带带阻滤波器抑制高功率发射机的非线性谐波输出和带通滤波器的寄生通带,其设计难点主要是如何消除其中心频率f0的三倍(3 f0)频处的寄生阻带问题.该文通过在平行耦合传输线滤波节开路端采用加载电容的方式,有效解决了基于平行耦合传输线的窄带带阻滤波器在上通带3f0处具有寄生阻带的问题,展宽了该类带阻滤波器的上通带带宽,拓宽了其适用范围.采用该方法,研制了一个中心频率在5.3 GHz的窄带带阻滤波器,实测结果表明,该带阻滤波器具有良好的上通带带宽.

Abstract:The narrow-band band-stop filters are often used in microwave systems to suppress the nonlinear harmonic output of high-power transmitters and the parasitic passband of band-pass filters. The difficulty of the design is to eliminate the parasitic stopband at three times the center frequency f0. This paper effectively solved the problem of parasitic stopband at 3f0 and largely extended the upper passband by means of loading a lumped capacity at the open end of the parallel-coupled line. According to this method, a narrow band-stop filter with a center frequency at 5.3 GHz has been presented. The test result shows that this filter has a good performance at upper passband.

作者:王占平, 杨博, 陈华, 王亚非, 王林智, 孙伟,

关键词:加载电容, 窄带带阻滤波器, 平行耦合传输线线, 寄生阻带, 上通带

学习掌握微波滤波器设计,敬请关注: 微波滤波器设计培训课程

上一篇:数控超宽带带通滤波器组件
下一篇:组合式非周期缺陷接地结构低通滤波器的分析

微波滤波器设计培训视频教程详情>>

  网站地图