- 易迪拓培训,专注于微波、射频、天线设计工程师的培养
HFSS15: Connector - Terminal Example
录入：edatop.com 点击：
Description - a simplified model of a four pin section of a connector. This is a driven terminal design.
Model - the connector is configured with lumped ports on each end of the two inner pins. The two outer pins are each grounded at both ends. The boards are FR4 and the connector body is modfied epoxy. A radiation boundary is applied to the surrounding airbox.
Setup - Driven Terminal Solution with adapt at 5 GHz. An interpolating sweep is also included that has an upper frequency of 5 GHz and uses DC extrapolation at the low end.
Note | To view a port or boundary, select the desired item in the Project Tree. It is then highlighted in the Model window and the properties will be displayed in the Properties window. Selecting an object in the History tree will also display its properties. |
Connector Post Processing
After solving, you can view solution data by right-clicking on Setup1 and selecting Profile to display the Solution dialog. You also view the Solution tabs for Convergence, Matrix Data, and Mesh Statistics.
To view the S parameter plot show below, double click on XY plot1 in the Project Tree under Results.
HFSS 学习培训课程套装，专家讲解，视频教学，帮助您全面系统地学习掌握HFSS
上一篇：Computational Time
下一篇：Computation of Traces Based UDO Calculations
