- 易迪拓培训,专注于微波、射频、天线设计工程师的培养
HFSS15: DC Extrapolation options
录入：edatop.com 点击：
If the Design Setting for DC Extrapolation is set to Advanced, the DC Extrapolation tab appears for Fast and Interpolating sweeps. Otherwise, the DC value is calculated automatically.
1. Setting the Initial Frequency to 0 enables DC extrapolation for a sweep.
2. Enter a value for the Minimum Solved Frequency. This value represents the smallest frequency in the sweep for which a full solution is generated. The default is 100 Mhz.
Note | The Minimum Solved Frequency that you enter is solved independently of the step size. |
If you expect to use the same settings often, you can click the Set Defaults button. To use previously saved settings, click the Use Defaults button.
