- 易迪拓培训,专注于微波、射频、天线设计工程师的培养
HFSS15: Drawing a Circle
录入：edatop.com 点击：
Draw a circle by selecting a center point and a radius. Circles are drawn as true surfaces in the modeler.
1. Click Draw>Circle
.
2. Select the center point of the circle in one of the following ways:
• Click the point.
• Type the point’s coordinates in the text boxes in the status bar.
3. Specify the radius by selecting a point on the circle’s circumference in one of the following ways:
• Click the point.
• Type the coordinates of the point relative to the center point in the dX, dY, and dZ boxes, where d is the distance from the previously selected point.
If the Modeler option for editing properties of new primitives is checked, the Properties dialog box appears, enabling you to modify the object’s properties.
4. Click OK.
If the Automatically cover closed polyline option is selected in the Modeler Options window, the circle will be covered, resulting in a 2D sheet object. Otherwise it will be a closed 1D polyline object.
Note | The 3D Geometry Modeler permits drawing of true-curved objects. However, the solution will be obtained with a tetrahedral mesh which conforms to the true surface only within the limits identified by certain mesh settings. The modeler has default settings for this conformance which is a reasonable trade-off between solution speed and solution quality for most objects, but may not be ideal for all such objects. High-aspect ratio curves structures, such as helices with narrow and curved cross-sections, may benefit from user control of the faceting values. For details about these commands see: Technical Notes, "Surface Approximations" and related sections, Rectilinear Elements and Curvilinear Elements, "Modifying Surface Approximations," and "Guidelines for Modifying Surface Approximations" |
