HFSS15: Drawing a Polyline

A polyline is a single object that includes any combination of straight line, arc line, or spline segments. The endpoint of one segment is the start point for the next segment. Use the shortcut menu’s Set Edge Type commands to switch between straight line, arc line, or spline segments while drawing a polyline.

In the Polyline section of Operation tab of the Modeler Options, select or clear the Automatically cover closed polylines check box.

If checked, closed polylines become sheet objects, and are listed as such in the History tree. If unchecked, closed polylines are listed under lines in the History tree.

1. Click Draw>Line.

2. Right-click in the 3D Modeler window to access the shortcut menu, and then point to Set Edge Type.

3. Click Straight, Spline, 3 Point Arc, or Center Point Arc depending on which type of polyline segment you want to draw.

4. If you clicked Straight, follow the procedure for drawing a straight line.

If you clicked Spline, follow the procedure for drawing a spline.

If you clicked 3 Point Arc, follow the procedure for drawing a three-point arc line.

If you clicked Center Point Arc, follow the procedure for drawing a center-point arc line.

5. Repeat steps 2 and 3 for each segment of the polyline object. The endpoint of the previous segment serves as the start point for the next segment.

The shortcut menu lets you do the following for each segment:

Undo Previous Segment or Redo Previous Segment.

6. Complete the polyline in one of the following ways:

• Double-click the endpoint of the final segment.

• Click Done on the shortcut menu.

If the Modeler option for editing properties of new primitives is checked, the Properties dialog box appears, in which you can modify the object’s attributes by editing the Properties. Those listed under the Command tab describe the commands used to create the object. These commands also appear in the History tree. The Properties listed as line attributes include Name, Orientation, whether a Model object, whether to Display Wireframe, Color, Transparency, and whether to Show Direction as arrows. The Show Direction property is most helpful to unambiguously show the line start orientation when plotting fields along a line. Notice that by going to the History tree selecting Create Polyline for that object, you can assign a cross section and dimensions to a polyline.

7. Click OK.

If you select a polyline in the History tree, you can use the Measure mode to see the total length.