- 易迪拓培训,专注于微波、射频、天线设计工程师的培养
HFSS15: HFSS Transient Excitations
录入：edatop.com 点击：
You can assign the following types of excitation. For HFSS Transient designs, the properties for each excitation include a Transient tab, enabling you to designate each excitation as Active or Passive.
Wave Port | Represents the external surface through which a signal enters or exits the geometry. It is effectively a semi-infinite waveguide attached to the model. This waveguide has the same cross-section and material properties as the port. Wave ports are placed on this interface to provide a means to link the model device to the external world. |
Lumped Port | Represents an internal surface through which a signal enters or exits the device. It is effectively a lumped element for exciting the device and measuring the S-parameters. |
Terminal | A terminal is defined by one or more conductors in contact with the port. HFSS treats microwave structures as a black box that may have one or more terminals, each of which contains a voltage/current pair. Terminals are assigned either manually or automatically. |
Plane Wave | Represents a wave that propagates in one direction and is uniform in the directions perpendicular to that of its propagation. |
Voltage Source | Represents a constant electric field across feed points. |
Current Source | Represents a constant electric current across feed points. |
