• 易迪拓培训,专注于微波、射频、天线设计工程师的培养
首页 > HFSS > HFSS help > Modifying the Field Plot Scale

HFSS15: Modifying the Field Plot Scale

录入:edatop.com     点击:

To change how field quantities are scaled on the field overlay plot:

1. Click HFSS or HFSS-IE>Fields>Modify Plot Attributes or in the Project tree, right click on the Field Overlays icon and select Modify Plots from the short-cut menu, or use the "m" hotkey.

The Select Plot Folder window appears.

2. Select the plot folder you want to modify, and then click OK.

All plots in the selected folder will be modified.

A dialog box with attribute settings for the selected folder appears.

3. Click the Scale tab.

4. Optionally, to change the number of divisions in the field plot scale, set the Num. Division field to a new value. You can click Save as Default, if desired.

5. Select one of the following scale options:

Auto

The full range of field values will be plotted on the selected surface or volume. Selecting Auto enables the Auto Scale Options and disables the Min and Max fields. By default, precision is not limited and auto-min is the actual computed min on the plotted geometry.

Use Limits

Only the field values between the minimum and maximum values will be plotted. Field values below or above these values will be plotted in the colors assigned to the minimum or maximum limits, respectively. Selecting Use Limits enables the Min and Max fields and disables the Auto Scale Options.

Field values have a precision of at most 6 decimal places (field solution files are saved in floating precision), so Min/Max numbers are displayed to this precision.

Specify Values

This enables a Scale Values button..


6. Optionally, use the Units drop down menu to select the default unit of measure for the plot.

The units specified here appear on the Color map for the fields plot, and for the properties dialog for the field quantities.

7. If you selected Use Limits, enter the lowest field value to be plotted in the Min. text box and the highest field value to be plotted in the Max. text box.

If you selected Auto, the Auto Scale Options are enabled. You should only changed for cases where auto-min is a small number. Use the 'Limits Max/Min precision to' checkbox to enable setting the drop down menu for the precision limit. The auto-min is the greater of the following:

• Actual computed Min

• Max/pow(10, num digits of field precision)

If you selected Specify Values, you can click the Scale Values button. This opens a dialog with an editable, scrollable list of the current scale values. To apply the changes you make, click the OK button. To close the dialog without make changes, click Cancel.

8. If you selected Auto or use Limits, you can select one of the following options:

Linear

Field values are plotted on a linear scale.

Log

Field values are plotted on a logarithmic scale. If field plots have negative and positive values and when auto-scale is selected, the log-scale choice automatically sets the Min value as the Max/Min Ratio. (If field plots have all negative values, Log is not allowed.)


9. Select Real time mode if you want the changes to take effect immediately in the view window.

If this option is cleared, click Apply when you want to see the changes.

10. Optionally, you can use the Save As Default button to save the following to registry:

• Whether to limit field precision,

• The number of digits of field precision,

• Whether to use log/linear scale.

Auto scale is the default for new plots. For scalar-in-volume plots, iso-surface (rather than cloud) is the default display

11. Click Close to dismiss the window.

HFSS 学习培训课程套装,专家讲解,视频教学,帮助您全面系统地学习掌握HFSS

上一篇:Modifying Vector Field Plot Arrows
下一篇:Modifying the Legend in a Report

HFSS视频培训课程推荐详情>>
HFSS教程推荐

  网站地图