- 易迪拓培训,专注于微波、射频、天线设计工程师的培养
HFSS15: Modifying Object Command Properties Using the Properties Window
The Command tab in the Properties window displays information about an action selected in the history tree that was performed either to create an object, such as the Draw>Box) command, or to modify an object, such as the Edit>Duplicate>Mirror command.
Not all command properties can be modified. In general, the command properties that you can typically modify are the numeric values, such as position values (base position, normal position, start position, etc.), size values (height, radius, etc.), and various other coordinate values. You can also modify many of the unit settings for a command property. You can modify names, but names must include only letters, numbers and underscores. Illegal names are not accepted and generate a message in the Message window.
1. In the history tree, select the command for which you want to edit its properties.
Hint | Press and hold CTRL to select multiple commands. If you select multiple commands, only the common, or shared, properties will be displayed under the Command tab. |
2. Under the Command tab in the Properties window, edit the command’s properties.
Depending on the property type, you can edit it by doing one of the following:
Select the check box to apply the property; clear the check box to disable the property.
Click in the field and edit the numeric values or text, and then press ENTER.
Click the button and then edit the current settings in the window or dialog box that appears.
Click the attribute, and then select a new setting from the menu that appears.