• 易迪拓培训,专注于微波、射频、天线设计工程师的培养
首页 > HFSS > HFSS help > Overriding a Variable's Current Value in a Parametric Setup

HFSS15: Overriding a Variable's Current Value in a Parametric Setup

录入:edatop.com     点击:

If you choose not to sweep a variable HFSS uses the variable's current value set for the nominal design when it solves the parametric setup. To override the current variable value for a parametric setup:

1. In the Setup Sweep Analysis dialog box, click the General tab.

Under Starting Point, all of the current independent design variable values are listed.

2. Click the Value box of the variable with the value you want to override for the parametric setup.

3. Type a new value in the Value box, and then press Enter.

The Override option is now selected. This indicates that the value you entered will be used for the parametric setup. For this parametric setup, the new value will override the current value in the nominal design.

Note

Alternatively, you can select the Override option first, and then type a new variable value in the Value box.

4. Optionally, click a new unit in the Units box.

To revert to the current variable value, clear the Override option.

Warning

Variable values must be single real numbers, or expressions that evaluate to single real numbers. Complex numbers cannot be used as the values of variables in any optimetric analysis.

HFSS 学习培训课程套装,专家讲解,视频教学,帮助您全面系统地学习掌握HFSS

上一篇:Optiguide
下一篇:Optimizing A Waveguide Tee Junction

HFSS视频培训课程推荐详情>>
HFSS教程推荐

  网站地图