- 易迪拓培训,专注于微波、射频、天线设计工程师的培养
HFSS15: Setting Field Plot Defaults
录入：edatop.com 点击：
Each new field plot uses the default plot settings specified in the Set Plot Defaults dialog box.
To modify the default plot settings:
1. If a plot folder has not been created, click Field Overlays in the project tree.
2. Click HFSS or HFSS-IE>Fields>Set Plot Defaults
.
The Set Plot Defaults dialog box appears.
3. Select the solution to plot from the Solution pull-down list.
4. Select the plot folder in which new plots will be stored from the Quantity type pull-down list. Choose one of the following options:
New Folder | Each new plot will be stored in a separate folder in the project tree. |
Automatic | Each new plot will be stored in a folder determined by HFSS as the most appropriate based on the plotted field quantity. For example, all surface magnitude E plots will be stored in the same folder. |
An existing folder | Select the existing folder in which you want to store new plots. |
Note | Plots stored in the same folder will use the same color key. The Auto scale setting will be based on the maximum field solution value present in a plot. |
5. Under Intrinsic Variables, specify the frequency and phase angle at which the field quantity is evaluated.
6. Click OK.
HFSS 学习培训课程套装，专家讲解，视频教学，帮助您全面系统地学习掌握HFSS
上一篇：Setting Adaptive Analysis Parameters for HFSS
下一篇：Setting a Goal Value
