- 易迪拓培训,专注于微波、射频、天线设计工程师的培养
HFSS15: Solving a Single Setup
录入：edatop.com 点击：
To run a single setup:
1. Select a solution setup in the project tree.
2. Right-click and select Analyze from the shortcut menu.
HFSS computes the 3D field solution inside the structure. Each solution setup is solved in the order it appears in the project tree.
To run more than one analysis at a time, follow the same procedure while a simulation is running. The next solution setup will be queued and solved when the previous solution is complete.
Note | If a linked dependency in the setup is already simulating (for example, due to setup links to the same external source for a near or far field wave, or a magnetic bias), HFSS will not allow another dependent simulation to start until the first use of the source has completed. |
To solve two or more sweeps or two or more parametric analyses under a setup:
Configure two or more machines for a distributed analysis. See Solving Remotely for configuration issues, Distributed Analysis for license issues, and Configuring Distributed Analysis for setting up the HFSS General Options.
1. In the project tree, under the design you want to solve, right-click the setup icon that includes the sweeps of interest.
2. Click Analyze on the shortcut menu.
Each solution sweep under that setup is solved in the order it appears in the project tree, using the available machines.
HFSS 学习培训课程套装，专家讲解，视频教学，帮助您全面系统地学习掌握HFSS
上一篇：Specifying Initial Mesh Settings
下一篇：Specifying a Solution Quantity for a Cost Function Goal
