- 易迪拓培训,专注于微波、射频、天线设计工程师的培养
HFSS15: Sweeping Values Across a Distance
录入：edatop.com 点击：
1. If you are plotting a field quantity along a line, define a polyline object in the problem region.
If you are plotting a near-field quantity along a line, set up a near-field line.
2. In the Report dialog box, click the line geometry of interest in the Geometry list.
3. Specify the quantities you want to plot along the axes.
4. For the X (Primary Sweep), select the Distance variable.
The values at which the selected quantity or quantities will be plotted are listed to the right. By default, a post-processing polyline object is divided into 100 equally spaced points.
5. For Near field, to plot the selected quantity or quantities at every point on the line, select All Values.
For Near field, to plot the selected quantity or quantities at specific points on the line, clear the All Values option, and then select the point values on which you want to plot.
Note | All maximum near-field data calculated by HFSS is at their maximum over the selected line object; if you plot the parameter over a sweep of values, the parameter will have the same value at each point on the plot. |
HFSS 学习培训课程套装，专家讲解，视频教学，帮助您全面系统地学习掌握HFSS
上一篇：Surface Roughness Calculation for Impedance Boundary
下一篇：Submit the Large Scale DSO Job: Examples
