• 易迪拓培训,专注于微波、射频、天线设计工程师的培养
首页 > HFSS > HFSS使用问答 > HFSS仿真错误,Error while opening or writing the mesh files

HFSS仿真错误,Error while opening or writing the mesh files

录入:edatop.com     点击:
仿真有两个激励端口时出现了这些错误:什么原因啊?
[error] Adapting mesh, process mesh3d : Error while opening or writing the mesh files. (11:46 下午 三月 20, 2008)
[error] Simulation completed with execution error on server: Local Machine. (11:46 下午 三月 20, 2008)
[info] Parametric Analysis on ParametricSetup1 has been started. (11:46 下午 三月 20, 2008)
[info] A variation (AH='35mm' AL='27mm' BH='30.714mm' BL='27mm' d='0mm' feedlength='48.5mm' feedwidth='5mm' gndlength='65mm' gndwidth='65mm' l='4.5mm' rlength='15.05mm' slotwidth='1mm' subheight='1.575mm' u='5.95mm') has been requested (11:46 下午 三月 20, 2008)
[error] Recovering adaptive solution, process abc3d : Write failure in subprocess %3. Possible causes are: out of disk space, no file access privileges, or hardware and/or network problems. (11:48 下午 三月 20, 2008)
在别人的机器上跑可以阿?

 

应该是软件问题

申明网友回复良莠不齐,仅供参考。如需专业解答,请学习易迪拓培训专家讲授的HFSS视频培训教程

上一篇:HFSS如何仿真2个线圈之间的能量传递
下一篇:HFSS仿真同轴连接器遇到错误求助

HFSS视频培训课程推荐详情>>
HFSS教程推荐

  网站地图