- 易迪拓培训,专注于微波、射频、天线设计工程师的培养
HFSS Warning - Boundary 'Rad1' and Boundary 'gnd_plane' overlap
录入：edatop.com 点击：
我使用的是HFSS V10 版本的软件。今天做高频探针仿真时出现了下面的提示：
hfss_uhf_probe (E:/Ansoft/Pro/)
HFSSDesign1
[warning] Warning - Boundary 'Rad1' and Boundary 'gnd_plane' overlap. (10:52 上午 七月 25, 2009)
[warning] Warning - Boundary 'Rad1' and Boundary 'gnd_plane' overlap. (11:00 上午 七月 25, 2009)
[warning] Warning - Boundary 'Rad1' and Boundary 'gnd_plane' overlap. (11:01 上午 七月 25, 2009)
[error] Initial mesh, process mesh3d : Error while opening or writing the mesh files. (11:01 上午 七月 25, 2009)
[error] Simulation completed with execution error on server: Local Machine. (11:01 上午 七月 25, 2009)
然后结果就出不来了。请遇到过同样问题，或有解决方法的高手们帮帮忙。判断一下到底哪里做得不对。
我属于初学者，请回答的不要太专业。谢谢.
hfss_uhf_probe (E:/Ansoft/Pro/)
HFSSDesign1
[warning] Warning - Boundary 'Rad1' and Boundary 'gnd_plane' overlap. (10:52 上午 七月 25, 2009)
[warning] Warning - Boundary 'Rad1' and Boundary 'gnd_plane' overlap. (11:00 上午 七月 25, 2009)
[warning] Warning - Boundary 'Rad1' and Boundary 'gnd_plane' overlap. (11:01 上午 七月 25, 2009)
[error] Initial mesh, process mesh3d : Error while opening or writing the mesh files. (11:01 上午 七月 25, 2009)
[error] Simulation completed with execution error on server: Local Machine. (11:01 上午 七月 25, 2009)
然后结果就出不来了。请遇到过同样问题，或有解决方法的高手们帮帮忙。判断一下到底哪里做得不对。
我属于初学者，请回答的不要太专业。谢谢.
Boundary 'Rad1' and Boundary 'gnd_plane' overlap.
边界“Rad1”和边界“gnd_plane”重叠
没有专业，仅仅翻译了一下，查看边界的设置吧。很多问题可以看英文得到，不专业，也和是否初学无关，自己的东西要想想办法的嘛，呵呵
一个面只能是一种边界。
申明：网友回复良莠不齐，仅供参考。如需专业解答，请学习易迪拓培训专家讲授的HFSS视频培训教程。
