- 易迪拓培训,专注于微波、射频、天线设计工程师的培养
关于 微带线铁氧体移相器的问题
录入：edatop.com 点击：
我正在学习移相器设计，现在看了一篇关于移相器的文章，有几个地方不知道怎么表述。请大家帮忙解决一下 谢谢
1.It is also shown that after calibrating measured values to account for the ratio between the
applied external Ampere/turn values to the internally applied -field value used in the high-frequency structure simulator (HFSS), good agreement may be seen between the simulation and
experimental results.
2 All the microstrip lines are designed to be 50 . Tapered transitions are used to connect the three microstrip lines to the feed network structure as shown in Fig. 1(a).
3 A milling process was used to fabricate the vertical (90°) side walls where a photo-laminate etch process was used to fabricate the feed networks.
1.It is also shown that after calibrating measured values to account for the ratio between the
applied external Ampere/turn values to the internally applied -field value used in the high-frequency structure simulator (HFSS), good agreement may be seen between the simulation and
experimental results.
2 All the microstrip lines are designed to be 50 . Tapered transitions are used to connect the three microstrip lines to the feed network structure as shown in Fig. 1(a).
3 A milling process was used to fabricate the vertical (90°) side walls where a photo-laminate etch process was used to fabricate the feed networks.
网友回复:
这是在ieee上面下载的文章 ，我最近正在翻译这篇文章，很多的地方不明白，感兴趣的朋友可以一起看看 ，大家讨论讨论
网友回复:
东西很不错 有时间好好研究研究
网友回复:
一起学习下，邮件：cd0054115@126.com
网友回复:
不错我想做这方面的工作我想用耦合微带线来做
有时间可以交流交流哈QQ：285432879
网友回复:
共同学习 727493096@qq.com
申明：网友回复良莠不齐，仅供参考。如需专业帮助，请咨询本站专家，并推荐学习李明洋老师的HFSS视频培训课程。
申明：网友回复良莠不齐，仅供参考。如需专业解答，请学习易迪拓培训专家讲授的HFSS视频培训教程。
上一篇：请教如何获得far field的(db)GainTotal数据文件
下一篇：HFSS 4层PCB差分过孔的研究 PPT+HFSS模型
